Table of Contents
Advertisement
AT COMMANDS
COMMAND
DESCRIPTION
\N6
Auto-reliable LAPM, MNP, and buffer mode.
\Q0
Disable DTE flow control.
\Q1
Bi-directional Xon/Xoff.
\Q2
Unidirectional CTS interface signal.
Bidirectional hardware flow control. (RTS/CTS)
\Q3
Disconnects if no activity for specified time; use
\T0
values 0-90 (seconds). If value = 0 (default), the
time is disabled.
Disable MNP responses.
\V0
\V1
Enable MNP responses.
%C0
Disable Data Compression.
Enable Data Compression.
%C1
%E0
Disable Auto Retrain.
Enable Auto Retrain.
%E1
Disable Caller ID.
#CC0
Format modem for single message sent to DTE.
#CC1
Modem Commands, Registers, and Codes C-7
Advertisement
Table of Contents
