NEC VERSA 2205C Manual page 41

Make sure the NEC Versa 2205C is powered off
whenever you add or remove a mouse. Doing so
with the power on may damage either the system or
the mouse.
2. Connect the mouse cable connector to the key-
board/mouse port on the system. (The keyboard/mouse
port is the first one on the left.)
Power on the NEC Versa 2205C again.
3.
NOTE
mouse to either the NEC Versa MediaDock 2000 or
MiniDock 2000, see the user's guide that came with
your specific docking device.
2-18 Learning to Use the Hardware
!
CAUTION
Connecting an external mouse
For instructions on connecting an external