NEC VERSA 2205C Manual page 83

COMMAND
&T5
&T6
&T7
&T8
&V, &V0
&W, &W0
&W1
&X, &X0
&Y, &Y0
&Y1
&Zn=x
\G0
\G1
\N0
\N1
\N2
\N3
\N4
\N5
C-6 Modem Commands, Registers, and Codes
AT COMMANDS
DESCRIPTION
Deny remote request for RDL test.
Initiate RDL test.
Initiate RDL test with self-test.
Initiate local analog loopback with self-test.
View active configuration, profiles phone
numbers, and S register contents.
Save active configuration as User Profile 0.
Save active configuration as User Profile 1.
Modem source transmit clock.
Recall User Profile 0 on power up.
Recall User Profile 1 on power up.
Store telephone number x in directory entry n
( n =0-3, x =36 characters maximum.)
For example, to store phone number (555)555-
5555, you enter AT&Z0=5555555555. This stores
the phone number in position 0. To dial the
number, issue the following command:
ATDS=0
Turn off Xon/Xoff software flow control. (See also
\Q3 hardware flow control).
Turn on Xon/Xoff software flow control.
Normal mode (non MNP, buffered data)
Direct mode (non MNP, data not buffered)
Reliable MNP mode (Attempts MNP connection;
if unsuccessful, then disconnects.)
Auto reliable mode (MNP if remote is MNP;
otherwise, normal.)
Reliable LAPM mode.
Auto-reliable LAPM and buffer mode.