Phdisk; Auto Setup Utility; Using Auto Setup - NEC VERSA 2205C Manual

PHDisk

This utility creates a file on the hard disk that is large
enough to contain all the software in memory. Its default
size is approximately 16-MB. You will need to update this
utility only if you upgrade the amount of memory to more
than 16-MB in your NEC Versa 2200. This utility must be
run in DOS. (It will not run on a compressed drive.)

Auto Setup Utility

Auto Setup automatically configures your NEC Versa
2205C each time you start it up. This utility also lets you
change your system start-up settings.

Using Auto Setup

Use Auto Setup as follows:
1. Reboot your system. When the screen displays the large
blinking block at boot-up, press
2. When the Auto Setup Summary screen is displayed, en-
ter the highlighted letter in the menu bar to that repre-
sents the category you want.
For example, type
window.
Use the up and down arrows to move between selections
3.
displayed on the screen. Press
display setting options.
Follow the instructions at the bottom of the screen to
4.
make selections, change values, and exit.
3-6 About the Software
F1 .
to open the Disk Drive Settings
D
+ the arrow keys to
Alt