Connecting An External Monitor - NEC SHIELDPRO FC-N21S User Manual

To enable the virtual screen feature, follow the procedure below:
1. Click [Start]
2. Select the [Settings] tab, click the [Advanced] button.
3. Click the [Monitor] tab.
4. Click [Hide modes that this monitor cannot display] to uncheck it.
5.
Click [OK].
5.11.2.

Connecting an External Monitor

An external monitor can be connected to ShieldPRO through the external monitor connector.
1. Confirm that ShieldPRO is OFF.
2. Connect an approved monitor cable to the external monitor.
3. Turn on the power of the monitor before turning on the power of ShieldPRO.
4. If nothing appears on the monitor once ShieldPRO is running, press Fn + F3 to select the
monitor or both the monitor and LCD display (simultaneous display).
5. To adjust the display, follow the operations described in "5.11.1 Adjusting Screen Display".
Some Operating Systems may limit display modes.
Do not remove the external monitor from ShieldPRO in suspend (standby) mode.
If no external monitor is connected at restart of operations in ShieldPRO, the LCD display remains blank
without output. Press Fn + F3 to restore the LCD display.
Some Operating Systems or settings may not allow the monitor change by using hot keys Fn + F3.
[Control Panel] [Display]. The [Display Properties] dialog box appears.
NEC ShieldPRO FC-N21S Ruggedised Notebook Computer
User's Guide 0318-00002 Ver. 2.0 Dec 2008 – Page 51