Loading The Bios Setup Defaults - NEC SHIELDPRO FC-N21S User Manual
Ruggedised notebook computer
Hide thumbs
Also See for SHIELDPRO FC-N21S:
- Brochure & specs (16 pages) ,
- Quick start manual (21 pages)
Table of Contents
Advertisement
6.1.3.
Loading the BIOS SETUP Defaults
To return the data on the BIOS SETUP Utility to default settings, use the following procedure:
1. Turn on the power of ShieldPRO.
2. When the message "Press <F2> to SETUP or Press <F12> to Network boot." appears on
the BIOS Start screen, press F2.
3. The BIOS SETUP Utility appears.
4. Press F9.
5. The [Setup Confirmation] dialog box appears.
6. Select [Yes] and press Enter.
7. The system reads default settings.
8. Press F10.
9. Select [Yes] to save the default settings and press Enter.
10. The system saves the default values and exits the BIOS SETUP Utility.
NEC ShieldPRO FC-N21S Ruggedised Notebook Computer
User's Guide 0318-00002 Ver. 2.0 Dec 2008 – Page 73
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the SHIELDPRO FC-N21S and is the answer not in the manual?