Installing An Expansion Board In The Inside Slot - NEC POWERMATE P2166 Manual

7. Attach any signal cables required by the expansion
board.
Replace the system unit cover.
8.

Installing an Expansion Board in the Inside Slot

Use this procedure if installing an expansion board into the
inside slot in your system.
Remove the system unit cover.
1.
Follow any preinstallation instructions that comes with
2.
the expansion board (such as setting switches or jumpers
on the board).
Remove the two screws that secure the slot cover
3.
support and expansion slot cover to the rear of the
system.
Remove the slot cover support and slot cover from inside
the system unit.
Take care not to drop the slot cover and support into
the system.
!
CAUTION
Installing Options 3-19