Pin 2 Code; Changing Your Pin 2 Code; Bar Calls; Bar Password - NEC N223I Using Manual

PIN 2 code

Your phone supports advanced feature that may require a PIN 2 code to be entered before they can be accessed or modified. If the PIN 2
code is entered incorrectly 3 times, you will need to contact your service provider for a PUK 2 code.

Changing your PIN 2 code

Press 7 and 4. The PIN 2 change screen will be displayed.
Key in the current code. You will be prompted to enter the new code and then to enter it again as confirmation. A confirmation screen
will be displayed momentarily, then the security screen will be displayed.

Bar calls

This facility allows you to restrict the following types of calls made or received on your phone.
•
All outgoing
•
Outgoing international
•
Outgoing international except home
•
All incoming
•
All incoming when roaming
Press 7 and 5. There will be a delay while your phone checks its barring status with your network and then the call barring
screen will be displayed.
Use the and keys to select the type of barring (shown above) and whether it should be for Speech, Data, FAX or SMS,
then press Softkey 1. When a selection has been made, the selected setting will have a red bar over its icon.
When the setting has been made, press
Confirmation window will appear if you have made changes and pressed Softkey 2. Then press Softkey 1 to make settings available or press
Softkey 2 to cancel.

Bar password

Press 7 and 6 to change your bar password.
Enter current password, then enter new password.
Re-enter new password for confirmation and press Softkey 1.
36
, then enter your Network barring password and press Softkey 1.
Call barring facilities (barring,
cancelling barring and checking
barring) are network services and
may require a password.