Receiving Calls; Accepting A Call; Rejecting A Call; Putting A Call On Hold - NEC N223I Using Manual

Table of Contents

Receiving calls

When someone calls your number, the phone's ringer will sound (if set - see page 21), the LED will flash and the phone number of the person

calling may be displayed in the middle of the screen if the calling line identification (CLI) facility is available and the caller has activated the

feature. If the caller's phone number has been stored in your phonebook along with a name and a CLI picture (see page 26), that name and

picture will be displayed.

Press

or Softkey 1.

Press

briefly or Softkey 2 or close your phone.

You also have options for holding calls and diverting calls. These options depend upon your network and your subscription arrangements.

If your phone receives a call and you do not answer it, the screen will display the telephone number (or the name if a stored number) of the

caller (if available). This information is stored in the missed calls list. Up to 10 missed calls are stored in this list. The last 10 incoming calls

are stored in the incoming calls list.

When your phone has received one or more missed calls, the LED will continue to flash until you have opened it (if it was folded) or pressed

any key.

You can put an incoming or outgoing call on hold by pressing Softkey 1. To retrieve the call, press Softkey 1 again.

When your phone is closed, you can stop the ringing tone or vibration by pressing Side Key during receiving a call or messages, or sounding

alarm (see page 7).

When Quick Silent is active, the Quick Silent icon is displayed on the 2nd-LCD.

If the call cannot be connected, you will hear a tone. The display will give an appropriate message, and the phone will return to standby.

If your phone is set to Auto redial, the number will be automatically called again after a short delay (see page 16).

If a connection is broken, such as by a poor radio signal, then the phone returns to standby.

You can set your phone to answer a

call when any key is pressed - see

"Any key answer" on page 16. If you

are making a call, the phone gives

priority to receiving a call unless you

have already pressed