Table of Contents
Advertisement
Start-up
Switching the phone on
Hold down
for about a second, to switch the phone on. The screen will either remain blank or display
an animation or greetings text (see page 21 to change the text) and the phone is then in standby.
Switching the phone off
Hold down
until the display shows the power down message.
PIN code
The SIM card issued by your service provider has a security feature called PIN code protection. The PIN
(Personal Identification Number) is a number put on to the card by your Service Provider, and is 4 to 8 digits
long. Some service providers supply SIM cards which will cause your phone to prompt for a PIN code when it is
turned on. If this is the case, use the phone's keypad to enter your code. You can disable this prompt (see
page 35). If you insert a SIM card other than your own, information such as call logs may be lost.
Display information
Graphic display area
This area contains the greeting graphic on power up, status graphics and information when searching for networks and making calls. When
in the standby mode it shows the current network, vibrator status, mode status, current time and date, and whatever you have keyed in with
the phone's keypad. When
is pressed on the screen on which
(animated icons and text). Many of the phone's features are activated using the powerful menu structure (see page 10 on selecting the
phone's features).
Status Icons
This area contains icons which indicate the battery strength, new short message, call diversion on, new voice mail, GPRS attached, Line
status and Network signal strength.
2nd-LCD
This screen shows the information (clock, status icons or message) when your phone is closed. You can change the display direction of clock
or messages on the 2nd-LCD (for details, see page 22).
LED
There are 12 colours and Gradation for LED. Any of them can be allocated to specific phone numbers so incoming calls from these numbers
can be identified. During charging, it will be in Colour 9 (Apple).
Help & Softkey area
This area can contain help information (e.g. key presses remaining when composing a message) and context sensitive descriptions of the
softkeys' functions. This area will also display the alarm icon if the alarm is set.
icon is displayed, this area displays the phone's menu options
You may need to charge the battery
before using your phone. If the
phone gives no response when
switched on, read the information
about batteries on page 8.
The greeting message may not be
as indicated if any locks have been
set or a wrong SIM card has been
inserted. Please follow any
instructions given.
Standby screen
Do not remove the battery to switch
your phone off as this may cause
loss of stored information.
Status Icons
Graphic Display
Area
Help & Softkey
Area
Alarm on
icon
MENU icon
3
Advertisement
Table of Contents
