NEC MOBILEPRO 800 User Manual page 84

Follow these steps to communicate with another MobilePro
or your host PC.
1. Remove the PC Connect (serial) cable from the
MobilePro before attempting IrDA communication.
2. Open the display panels on the two units that you want to
use for communication.
3. Position the MobilePro units so that the IR ports face each
other. Position the units from 2 to 20 inches apart.
4. Be sure that nothing obstructs the path between the IR
ports on both units, and that the ports are aligned
properly.
5. Send your data by using the "Send To" selection in the
Windows CE Pocket Explorer File menu.
Highlight the file you want to transfer and choose "Infrared
Recipient" from the Send To selections. Your file is
transferred to the other MobilePro. The receiving MobilePro
uses the File/Receive command to receive the infrared
transmission.
Note:
If the units are too far apart or if
something blocks the path between the two
ports, data may not be sent or received correctly.
Using the NEC MobilePro 4-21