NEC MOBILEPRO 800 User Manual page 117

T
In the lower-right corner of the Mobile Devices window,
the connection status must show Waiting for mobile
device to connect.
T
In the ActiveSync Options dialog box in Windows CE
Services, enable synchronization. (Or you can select
Automatically synchronize if data is out-of-date.)
T
If you are communicating through a modem connected to
the host PC, turn on the modem. Set the Auto Connect to
At all times in Windows CE Services. Otherwise, open a
Mobile Devices window.
T
If you are communicating with the host PC through a dial-
up or network connection, log on to the network on the
host PC. Before you leave, select Enable a network
connection in the Windows CE Services Properties
dialog box.
T
If your computer must be turned off while you are away
from your office, you cannot synchronize remotely.
However, you can dial in directly to your network to
receive your email.
If these conditions are met, you can synchronize with your
host PC while away from the office in one of three ways:
T
Create a dial-up connection using a RAS account. Before
you can create this dial-up connection, your network
administrator must set up a RAS account for you. Once
connected to the network, your device detects your host
PC and initiates synchronization. Once the connection is
created and you are connected, select Start, Programs,
Communications, and then ActiveSync on the device. In
the ActiveSync dialog box, select the dial-up connection
you created as the method to connect and the name of the
computer you want to connect to.
Microsoft Windows CE Services D-5