NEC MOBILEPRO 800 User Manual page 39

The battery charging LED indicates the charging status of the
main battery pack when the NEC MobilePro is connected to
an AC power source. The LED status displays as follows:
T
Lights amber while charging.
T
Lights green when fully charged.
Note:
a battery pack gradually declines. Depending
upon use, a battery pack should recharge from
full depletion approximately 300 times during the
life of the battery. Should you notice that the
battery does not stay charged as long as
expected, it is probably necessary to replace the
battery with a new one. Please refer to the
section "Battery Replacement" later in this
chapter.
MobilePro Power Management
When your MobilePro is connected to an AC power source
and the main battery is removed from the system, be sure to
replace the main battery before disconnecting the AC adapter
to prevent possible data loss.
The MobilePro's internal data backup battery
provides power to the system for a limited period
of time when the main battery is removed and
the unit is not connected to an AC power source.
Do not remove the main battery from the unit for
an extended period of time unless the unit is
connected to an AC power source.
Through normal use, the capacity of
! CAUTION
Introducing the NEC MobilePro 2-13