NEC MOBILEPRO 800 User Manual page 104

Problem
The touch screen does not
respond.
The soft reset button does not
respond.
For further assistance, call NEC CSD Support Services at
Note:
If you purchased and are using this
computer outside of the U.S. and Canada, then a
local service may apply. Contact a local NEC
CSD dealer in your country.
Troubleshooting
Resolution
Press Ctrl Alt = to calibrate the
stylus input. Follow the on-screen
instructions to complete the
recalibration procedure.
Press the Soft reset button to
reset the unit.
Remove the main battery.
Reinstall the battery and make
sure it is seated properly. Try
resetting the unit again.
If the soft reset button at the top
of the keyboard does not respond,
use the full reset button inside the
battery bay. Refer to the section,
"Resetting the Mobile Pro," in
Chapter 4.
Caution: This second procedure
may result in the loss of the
memory contents including all
stored data, settings, and files.
Be sure to make regular backups.
1-800-632-4525
Troubleshooting A-3