NEC MOBILEPRO 800 User Manual page 66

Note:
The first time you install the main
battery, the MobilePro automatically powers on
when you open the display panel.
The first time you power on the MobilePro, the
screen contrast may need adjustment. Refer to
the following section, "Making Display Panel
Adjustments," for details.
If the MobilePro is not used for a specific length of time, it
automatically shuts off. You can select how long the unit
remains on through the Power selection in the Windows CE
Control Panel. On the Windows CE desktop, tap Start,
Settings, then select Control Panel. Double tap the Power
icon and select the Power Off tab to designate a power off
time.
Note:
As a general operation rule,
frequently back up and synchronize data
between your MobilePro and your host PC.
Synchronization occurs each time you connect
your MobilePro to your host PC, once initial
synchronization is configured. For details, see
the section, "Connecting to Your PC," in Chapter
1.
For details about backing up and restoring data,
see the section, "Backing Up and Restoring
Data," in Chapter 3.
Using the NEC MobilePro 4-3