NEC MOBILEPRO 800 User Manual page 18

T
Check the Ports listing to determine if any conflicts
exist (another device is assigned to or using the serial
port). The port may be flagged with an exclamation
point, for example, if any conflicts exist.
T
If another device is assigned to or is using the serial
port, you must reassign the device to free up the serial
port for MobilePro synchronization.
Proceed to the next section to install Windows CE Services.
Installing Windows CE Services
You must install Windows CE Services on your host PC to
enable synchronization with your MobilePro. The Microsoft
Windows CE Services CD that ships with your MobilePro
contains the Windows CE Services software designed for
synchronization with Microsoft Office components. The
following procedure assumes Microsoft Outlook 97 as the
host PC synchronization component.
Follow these steps to install Windows CE Services for
synchronization with Microsoft Outlook. The installation
sequence may vary depending upon the Microsoft
components installed on your host PC.
Note:
operating system, you must install Windows NT
Networking before installing Windows CE
Services to your host PC.
If your host PC uses the Windows NT
Getting Started 1-11