Connecting Extensions and Setting Up the Telephone
Connecting Extensions
Each 16ESIU Card connects 16 digital extensions. Each 16SLIU Card connects 16 analog extensions, and
each 8SLIU Card connects 8 analog extensions.
To connect extensions:
1.
Using Figure 14: Connecting 16ESIU Digital Station Cards (page 32) and Figure 16: Connecting
16SLIU and 8SLIU Cards (page 34) as a guide, plug the installation cable mod jacks into the appropriate
connectors on the station cards.
2.
Install a modular jack for each extension within 6 feet of the telephone's location.
3.
For each extension, run one-pair 24 AWG station cable from the station block to the modular jack.
- To make adds, moves, and changes easier, be sure to leave a service loop in your station cable.
4.
Terminate the station cable
5.
Install bridging clips as required.
Station
Block
DSX-80/160 Hardware Manual
Connecting Extensions and Setting Up the Telephone
WHT/BLU
ESIU
ESIU
SLIU
25-Pair
Installation Cable
(P/N 80892)
YEL
BLU-WHT
RED
DTH-1-1
Figure 24: Connecting Extensions
-
BLU/WHT
leads to the
RED
YEL
BLU-WHT
RED
BLK
WHT-BLU
GRN
DSX Keyset
and
GRN
lugs in the modular jack.
YEL
BLK
BLU-WHT
WHT-BLU
RED
GRN
BLK
WHT-BLU
GRN
DSS Console
Installation ◆ 41