NEC DSX WIRELESS HEADSET ADAPTER User Manual page 8

U U s s i i n n g g t t h h e e H H e e a a d d s s e e t t
Your extension is automatically in the Headset Mode when your headset is removed from its base. There is no
need to have a Headset Feature Key or dial
To place a call when using your headset:
1. Press a line key or
2. To hang up, tap your headset Call Control button.
– Your Ring/Message Lamp lights solid green when you are on a headset call.
To answer a call when using your headset:
1. When you hear ringing (triple beeps) in your headset, tap your headset Call Control button.
– If your extension has Headset Voice Announce enabled, voice-announced Intercom calls beep
and then connect to your headset.
– If your extension has Headset Voice Announce disabled, you hear three beeps in your headset
followed by your caller's voice broadcasting from your telephone speaker. To switch the call to
your headset, tap the headset Call Control button.
To convert a headset call to a Handsfree call:
1. Press
SPEAKER
– For Group Listen, press
– If you don't tap Call Control to hang up during Handsfree or Group Listen, the call returns to
your headset when you press
To convert a headset call to a Handset call:
1. Lift the handset.
2. Tap Call Control.
Other Feature Interactions
– Pressing
– Off-Hook Signaling works normally.
– Paging announcements broadcast through the telephone speaker, not the headset.
– While on a headset call, receive volume control is adjusted locally at the headset only.
A50-016312-001
(1093059)
#HS
and dial normally.
INTERCOM
.
SPEAKER
SPEAKER
while on a call mutes the headset microphone.
MUTE
NEC Unified Solutions, Inc.
4 Forest Parkway, Shelton, CT 06484
203-926-5400
TEL:
to turn the Headset Mode on and off.
again (until it flashes).
to hang up.
203-929-0535
FAX:
www.necdsx.com
Empowered by Innovation