NEC ASPILA EX Quick Reference Manual page 7

If your call doesn't go through...
Set Camp On / Callback
8 5 0
(Hear Busy Tone
Camp On Key
or No Answer)
(851+35)
<Camp On> In case of Intercom Call, when you hear ringing, wait for the called party to answer.
In case of Outside Call, when you hear Dial Tone, begin telephone number dialing.
<Callback> In case of Intercom Call, when your phone starts the ringing, lift handset and wait for the
called party to answer.
In case of Outside Call, when your phone starts the ringing, lift handset, hear Dial Tone, and
begin telephone number dialing.
This function is applicable in case all trunks are busy condition. (not applicable for dialed outside party busy)
Cancel Camp On / Callback
(In case of Camp On)
Set / Answer a Message Waiting
Set
8
(Hear Busy Tone
or No Answer)
Your phone's
Answer
Indicator is
flashing in Green
8
When you set a MW, the called party's Indicator starts to flash, and your Indicator is lit in Green.
When you answer a MW, the Indicator shall automatically be off when the called party answers.
<Camp On> Wait without
hanging up
Wait for the
<Callback>
system to call
you back
8 7 0
MSG
4 1
MW Key
(851+31)
MSG
4 1
MW Key
(851+31)
9
For Your Convenience
Program Personal Speed Dialing <Basic Digital Telephone>
There are no One-Touch Keys on Basic Digital Telephone, but the system provides Personal Speed Dialing
function instead of One-Touch Keys.
Bin No.
CALL 1
8 5 5 ?
Up to 10 (Bin No.0-9) numbers can be registered.
Up to 24 digits dialing can be registered,
When you register a telephone number, "9" (Trunk Access Code) should be added on top of number.
If you want to continue the operation, dial Bin No. instead of SPK Key to finish.
Register Abbreviated Dialing <Display Key Telephone>
(Common ABB)
CALL 1
8 5 3
(Group ABB)
8 5 4
Name
HOLD
? ?
The digit of Bin No. depends on the system setting. (0-9 / 00-99 / 000-999)
System setting is necessary for Group ABB function. Ask your Supplier for more details.
"9" (Trunk Access Code) should be added on top of number.
Name can be entered by Dial Pad Keys. (See P5)
Up to 24 digits dialing can be registered, and up to 12 characters can be registered as name.
If you want to continue the operation, dial Bin No. instead of SPK Key to finish.
You can skip to enter the name. (No enter any character, then press "HOLD" Key).
You can erase the registered number & name by pressing "CLEAR" Key after dialing Bin No..
Language Selection for your Display <Display Key Telephone>
Language Type
CALL1
7 7 8 ?
0 3 6
Japanese French
1 English 4 Italian 7
2 German 5 Spanish 8
Telephone Number
HOLD
9 ? ?
<twice>
Extension Number
? ? ?
SPK
Bin No. Telephone Number
? ? ? 9 ? ?
HOLD SPK
SPK
9
Dutch Danish
Portuguese Swedish
Norwegian
6