Download
Share
Print this page
  1. Manuals
  2. Brands
  3. netvox Manuals
  4. Security Sensors
  5. RA0715
  6. User manual

netvox RA0715 User Manual

Wireless co2/temperature/humidity sensor
Hide thumbs Also See for RA0715:

Advertisement

Quick Links

Download this manual
RA0715_R72615_RA0715Y
Wireless CO
/Temperature/Humidity Sensor
2
Wireless CO
/ Temperature /
2
Humidity Sensor
User Manual
Copyright© Netvox Technology Co., Ltd.
This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence and
shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX Technology. The specifications are subject to change
without prior notice.

Advertisement

loading
Need help?

Need help?

Do you have a question about the RA0715 and is the answer not in the manual?

Questions and answers

Related Manuals for netvox RA0715

Summary of Contents for netvox RA0715

  • Page 1 This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX Technology. The specifications are subject to change...

  • Page 2: Table Of Contents

    Table of Contents 1. Introduction ..............2 2. Appearance ..............3 3. Features ................4 4. Set up Instructions ............4 5. Data Report ..............6 5.1 Example of ReportDataCmd ........7 5.2 Example of ConfigureCmd ........9 5.3 Example of GlobalCalibrateCmd ......10 5.4 Set/GetSensorAlarmThresholdCmd ......

  • Page 3: Introduction

    1. Introduction RA0715_R72615_RA0715Y is a Class A device based on the LoRaWAN protocol of Netvox and is compatible with the LoRaWAN protocol. RA0715_R72615_RA0715Y can be connected with the sensor of the temperature and humidity, and CO . The values collected by the sensor are reported to the corresponding gateway.

  • Page 4: Appearance

    2. Appearance Temperature & Humidity sensor Indicator Function Key Built-in CO sensor ▲ RA0715 Solar Panel Waterproof Cover Built-in Battery Pack Built-in CO , Temperature & Humidity Sensor ▲ R72615 Built-in CO , Temperature & Humidity sensor Power Cable ▲ RA0715Y...

  • Page 5: Features

    , temperature, and humidity detection ⚫ SX1276 wireless communication module 4. Set up Instructions On/Off RA0715 and RA0715Y are connected to DC 12V adapter for power on. Power On R72615 applies solar power and rechargeable lithium batteries. Connect with power on to turn on.
  • Page 6 Function Key Restore to the original setting / Turn off Press and Hold for 5 Seconds The green indicator flashes 20 times: success The green indicator remains off: fail The device is in the network: the green indicator flashes once and the device sends a data report.

  • Page 7: Data Report

    (7) It would take 180 seconds for the sensor to sample and process the collected value after pressing the button, please be patient. Please refer Netvox LoRaWAN Application Command document and Netvox Lora Command Resolver http://cmddoc.netvoxcloud.com/cmddoc to resolve uplink data.

  • Page 8: Example Of Reportdatacmd

    (a) When Report Type=0x01 is data packet; If the device data exceeds 11 bytes or there are shared data packets, the Report Type will have different values. (b) When Report Type=0xFFFF, it means that RA0715/ R72615/RA0715Y does not support the connected device or sensor malfunction.
  • Page 9 Example of RA0715Y Uplink: Packet #1: 010D07001CF2FFFFFFFF00 byte (01): Version byte(0D): DeviceType 0x0D － RA0715Y byte (07): ReportType byte (00): DC power supply byte (1CF2): CO －741ppm , 1CF4 Hex = 7410 Dec 7410*0.1ppm = 741 ppm byte (FFFF): NH3－N/A byte(FFFF): Noise－N/A byte (00): Reserved Packet #2: 010D0C0009E9175AFFFF00...

  • Page 10: Example Of Configurecmd

    0x82 ReportRsp (2 Bytes, Unit: s) (2 Bytes, Unit: s) (5 Bytes, Fixed 0x00) (1) Configure RA0715 device parameter MinTime = 30s, MaxTime = 3600s Downlink: 010500780E100000000000 Response: 8105000000000000000000 (configuration success) 8105010000000000000000 (configuration failure) (2) Read RA0715 device parameter Downlink: 0205000000000000000000...

  • Page 11: Example Of Globalcalibratecmd

    5.3 Example of GlobalCalibrateCmd FPort: 0x0E Sensor Description PayLoad(Fix =9 Bytes) Type Channel Multiplier Divisor DeltValue Reserved SetGlobalCalibr (1 Byte) 0x01 (2 Bytes, (2 Bytes, (2 Bytes, (2 Bytes, ateReq 0_Channel1 Unsigned) Unsigned) Signed) Fixed 0x00) 1_Channel2, etc. Channel Status SetGlobalCalibr (1 Byte) 0x81...
  • Page 12 (3) SetGlobalCalibrateReq Temperature decreased by 10℃ (25.1℃ → 15.1℃) Multiplier =0x0001, Divisor = 0x0001, and DeltValue = 0xFC18 Downlink: 01010000010001FC180000 Response: 8101000000000000000000 (4) GetGlobalCalibrateReq Downlink: 0201000000000000000000 Response: 82010000010001FC180000 (5) ClearGlobalCalibrateReq Downlink: 0300000000000000000000 Response: 8300000000000000000000...

  • Page 13: Set/Getsensoralarmthresholdcmd

    5.4 Set/GetSensorAlarmThresholdCmd Fport: 0x10 CmdID CmdDescriptor Payload (10 bytes) (1 byte) SensorType (1 byte, Channel (1 byte, SensorHighThreshold SensorLowThreshold 0x00_Disable ALL SetSensorAlarm 0x00_Channel1, (4 bytes, (4 bytes, 0x01 SensorthresholdSet, ThresholdReq 0x01_Chanel2, unit: 0.1℃; 0.01%; unit: 0.1℃; 0.01%; 0x01_Temperature, 0x02_Channel3, etc.) 0.1ppm) 0.1ppm) 0x02_Humidity,...
  • Page 14 (2) GetSensorAlarmThresholdReq Downlink: 0200010000000000000000 Response: 82000100000BB8000003E8 (3) Clear all thresholds (Set SensorType = 0) Downlink: 0100000000000000000000 Response: 8100000000000000000000 Note: a. The last configuration would be kept as the device is factory reset. b. Set SensorHigh/LowThreshold as 0xFFFFFFFF to disable threshold.

  • Page 15: Example Of Netvoxlorawanrejoin

    5.5 Example of NetvoxLoRaWANRejoin Fport: 0x20 CmdID CmdDescriptor Payload (5 Bytes) (1 Byte) RejoinCheckPeriod (4 Bytes, unit: 1s SetNetvoxLoRaWANRejoinReq 0x01 RejoinThreshold (1 Byte) 0XFFFFFFFF Disable NetvoxLoRaWANRejoinFunction) SetNetvoxLoRaWANRejoinRsp 0x81 Status (1 Byte, 0x00_success) Reserved (4 Bytes, Fixed 0x00) GetNetvoxLoRaWANRejoinReq 0x02 Reserved (5 bytes, Fixed 0x00) GetNetvoxLoRaWANRejoinRsp 0x82 RejoinCheckPeriod (4 Bytes, unit:1s)

  • Page 16: Installation

    6. Installation (1) RA0715 does not have waterproof function. After the device completes joining the network, please place it indoors. (2) R72615 has a waterproof function. After the device completes joining the network, please place it outdoors. A. In the installed position, loosen the U-shaped screw, the mating washer and the nut at the bottom of R72617, and then make the U-shaped screw pass through the appropriate size cylinder and fix it on the fixing strut flap of R72615.
  • Page 17 (3) RA0715Y is waterproof and can be placed outdoors after the device completes joining the network. A. In the installed position, loosen the U-shaped screw, the mating washer and the nut at the bottom of RA0715Y, and then make the U-shaped screw pass through the appropriate size cylinder and fix it on the fixing strut flap of RA0715Y. Install the washer and the nut in order and lock the nut till RA0715Y body is stable and does not shake.

  • Page 18: Important Maintenance Instructions

    7. Important Maintenance Instructions Kindly pay attention to the following to achieve the best maintenance of the product: • Keep the device dry. Rain, moisture, or any liquid might contain minerals and thus corrode electronic circuits. If the device gets wet, please dry it completely. •...

This manual is also suitable for:

R72615Ra0715y