Dionex UltiMate 3000 Quick Installation Manual
Hide thumbs
Also See for UltiMate 3000:
- Applications (59 pages) ,
- System installation and application (73 pages) ,
- Installation manual
Subscribe to Our Youtube Channel
Related Manuals for Dionex UltiMate 3000
Summary of Contents for Dionex UltiMate 3000
- Page 1 Moveable PC Holder for UltiMate™ 3000 Systems P/N 6000.1010 Quick Installation Guide January 2007 Rev1 Page © 2007 Dionex...
-
Page 2: Included In Delivery
1. Introduction The moveable PC holder can be part of an UltiMate 3000 system configuration. It can hold laptop or tablet (with touch screen) PCs, which can run Chromeleon or Chromeleon XPress. Chromeoleon XPress is used as a control-only setup with UV data being acquired by other data management software via the analog signal outputs of the PDA-3000 or VWD-3x00. - Page 3 Move the holder column onto the pivot arm tablet PC holder and align the holder and tighten the lever. column shaft with the steel plate of the pivot arm. Move the cable clamps onto the holder column. January 2007 Rev1 Page © 2007 Dionex...
- Page 4 While removing the left foot of the detector and mounting the holder base, make sure that the detector remains stable on the bench. As soon as the holder base is mounted, move the detector completely back onto the bench. January 2007 Rev1 Page © 2007 Dionex...
- Page 5 Depending on the adjusted height, the PC holder might accidentally be pushed into the sampling area of the autosampler. In order to avoid any damage to the autosampler (e.g., vial pusher and needle), Dionex recommends installing front cover (P/N 6820.1419) that is available as an option for the WPS-3000 autosamplers.
Need help?
Do you have a question about the UltiMate 3000 and is the answer not in the manual?
Questions and answers