Table of Contents
Advertisement
A
S
DVANCED
ETUP
Remote Management
By default, management access is only available to users on your local
network. However, you can also manage the Barricade ADSL Router from
a remote host by entering the IP address of a remote computer on this
screen. Check the Enabled check box, and enter the IP address of the Host
Address and click "SAVE SETTINGS."
Note: If you check Enable and specify an IP address of 0.0.0.0, any
remote host can manage the Barricade ADSL Router.
For remote management via WAN IP address you need to connect using
port 8080. Simply enter WAN IP address followed by :8080, for example,
212.120.68.20:8080.
4-19
Advertisement
Table of Contents
