The Barricade ADSL Router includes an LED display on the front panel
for system power and port indications that simplifies installation and
network troubleshooting. It also provides the following ports on the rear
panel:
RJ-11
Port
Figure 2-1. Rear Panel
Item
LAN Ports
Power
button
Reset Button
Power Inlet
ADSL Port
Reset
Power
Power
Button
Connector
Switch
Button
Description
Fast Ethernet ports (RJ-45). Connect devices on your local area
network to these ports (i.e., a PC, hub, or switch).
Press this button to turn on/turn off the Barricade ADSL
Router.
Use this button to reset the power and restore the default
factory settings. To reset without losing configuration settings,
see "Reset" on page 4-64.
Connect the included power adapter to this inlet.
Warning: Using the wrong type of power adapter may damage
the Barricade ADSL Router.
WAN port (RJ-11). Connect your ADSL line to this port.
H
D
ARDWARE
RJ-45 LAN ports
ESCRIPTION
2-3