Table of Contents
Advertisement
To use the print server built into the Barricade, you must first install the
Port Monitor program as described in the following section for
Windows 95/98/Me.
To set up the Barricade Print Server for Windows NT, go to page 6-4. For
Windows 2000/XP, see "Printer Server Setup in Windows 2000/XP" on
page 6-6. For Unix, see "Printer Server Setup in Unix Systems" on page
6-8.
Printer Server Setup in Windows 95/98/Me
For Windows 95/98/Me clients, you need to install the port monitor
program as described in this section.
You may find that the instructions here do not exactly match your version
of Windows. This is because these steps and screenshots were created in
Windows 98. Windows 95 and Windows Millennium Edition are very
similar, but not identical, to Windows 98.
1. Insert the installation CD-ROM into your CD-ROM drive. Under the
PrintSvr directory, run the "setup.exe" program. The Port Monitor
installation program advises you to close all other Windows programs
currently running on your computer. Click "Next" to continue.
C
ONFIGURING
C
HAPTER
P
RINTER
S
ERVICES
6
6-1
Advertisement
Table of Contents
