Flycam Galaxy Assembly Manual

Arm vest with stabilizer

Table of Contents

Download this manual

Galaxy Arm Vest with HD-3000 Stabilizer

(GLXY-AV-HD-3)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Galaxy Arm

HD-3000

Stabilizer

Galaxy Vest

Table Clamp

Metal Quick

Release

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the Galaxy and is the answer not in the manual?

Page 1 Galaxy Arm Vest with HD-3000 Stabilizer (GLXY-AV-HD-3) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Adding Weights & Positioning for Proper Balance  Continuing assembly & balance requirements to make your Flycam Handheld Video Stabilizer fully functional you will note that the base platform has a provision to mount balance weights via 2x BH bolts secured with knobs on...
Page 3  Loosen the knobs & insert Arm’s male socket into female socket of vest as shown in image. Now, your Galaxy Steadycam Arm & Vest assembly is ready to use. Arm Adjustment The arm tension is adjusted for the heaviest camcorder, so when you apply the camcorder and sled on the arm for the first time it does not stay down.
Page 4 Storage If you are going to store your Flycam Galaxy Arm & Vest for a long period of time then please store the unit up right in a dry or low to normal humidity area whenever possible. If you are unable to find an environment like this, then we suggest you store the unit in an airtight plastic container or bag.

Hd-3000