Related Manuals for MantelMount MM-Max1
Summary of Contents for MantelMount MM-Max1
- Page 1 MM-Max1 Pull Down TV Mount INSTALLATION INSTRUCTIONS Read this entire manual before you begin! Contains important safety information – please save this manual.
- Page 2 Some steps in this installation manual may require two people. Helpful Installation Tips and Videos can be fount at: http://mantelmount.com/install-tips For questions during installation? Contact Customer Support: Monday – Friday, 7am– 4pm PST 1.800.897. 9755 x1 or support@mantelmount.com MantelMount Max1 Installation Instructions...
- Page 3 Handle changes to red color at temperatures above 110 ºF to warn users if the fireplace is too hot for TV safety © 2024 MANEHU PRODUCT ALLIANCE, LLC. For more information on MantelMount patented technology visit: www.mantelmount.com/pages/patents Customer Support 1.800.897.9755 x1 support@mantelmount.com...
-
Page 4: Before Installation
Width: 200-700mm Height: 100-500mm Verify that MM-Max1 will fit your space: The height of your space must be at least 4 inches taller than the largest height of your TV, or your TV / Soundbar combination. Verify you have the required tools. - Page 5 Wall Frame Covers Large Cable Clips {62} {16} {42} x2 VESA Extender x2 Sound Bar Wings x1 Center Heat Sensing Handle If any parts are missing or damaged, contact Customer Support at 1-800-897-9755 x1 before installing. Customer Support 1.800.897.9755 x1 support@mantelmount.com...
- Page 6 If TV VESA holes align with main holes If TV VESA holes DO NOT align with main on VESA Extenders holes on VESA Extenders Vesa Extenders {62} will NOT be used. Vesa Extenders {62} WILL be used. MantelMount Max1 Installation Instructions...
- Page 7 C AU T I O N {09} {11} {12} {12} {12} Do not use screws that are too long for the TV’s threaded {09} {11} {12} {12} {12} inserts because it may damage internal components! Customer Support 1.800.897.9755 x1 support@mantelmount.com...
- Page 8 DO NOT install the Center Heat Sensing Handle {42} until STEP 5.3. {30} {30} {43} {15} {15} {15} {23} {18} {18} {23} {23} {18} {18} {18} {23} {23} IMPORTANT: Screws {18} must be on INSIDE. Nuts {23} must be on OUTSIDE MantelMount Max1 Installation Instructions...
- Page 9 Horizontal Brace, or too tall for the Handle to reach below. Otherwise don't use the wings. {23} {10} {16} {59} Mounting Solution for Wider Sound Bar Mounting Solution for Taller Sound Bar Customer Support 1.800.897.9755 x1 support@mantelmount.com...
- Page 10 This Distance Bottom of TV Bottom of Soundbar Measure from bottom of the Vertical Braces to the bottom of TV (or soundbar if using one) then add four inches for the height of the wall frame. MantelMount Max1 Installation Instructions...
- Page 11 Drill pilot holes to a depth of 3 in. (75mm) using a 3/8" in. (10mm) diameter masonry drill bit. Insert Concrete Anchors {57} until flush. Note: Pilot holes must be at least 2 inches away from mortar joint. Customer Support 1.800.897.9755 x1 support@mantelmount.com...
- Page 12 Attach The Wall Frame Covers {41}: Tuck the center tabs under each other before snapping the Cover onto the metal post inside the Wall Frame. To remove, gently pry the Cover from the end. 1/4 Gap MantelMount Max1 Installation Instructions...
- Page 13 Tilting Screws as shown in Mechanism, remove any unwanted tilting by turning STEP 3.5. these screws in or out. NOTE: Make sure that both screws are equally snug against the Lifting Mechanism. Customer Support 1.800.897.9755 x1 support@mantelmount.com...
-
Page 14: Step 4 - Attach Tv To Mount
DO NOT TIGHTEN them until the TV is leveled as shown in STEP 5.1. If the TV starts to lower, REMOVE THE TV and increase the lifting force as shown in STEP 4.1. NOTE: This Step Will Require Two People. {15} MantelMount Max1 Installation Instructions... - Page 15 From the back of the Lifting Mechanism, adjust the lifting {15} to the Horizontal Brace {43}. force as you did in STEP 4.1, until the force required to raise and lower the TV is the same in both directions. {15} {42} Customer Support 1.800.897.9755 x1 support@mantelmount.com...
- Page 16 The cable should not pinch or bind through all arm and attach with the small cable clip, and then on the motions. (the TV and TV Braces are not shown) INSIDE of the second horizontal arm and attach with the large cable clip. MantelMount Max1 Installation Instructions...
- Page 17 NOTES Customer Support 1.800.897.9755 x1 support@mantelmount.com...
- Page 18 BOM PAGE 1 25 Mar 2024 MantelMount MM-MAX1 MantelMount Max1 Installation Instructions...
- Page 19 Customer Support 1.800.897.9755 x1 support@mantelmount.com...
- Page 20 For missing/damaged parts or questions during installation, please contact our Customer Support team at 1.800.897.9755 ext.1 or support@mantelmount.com. Customer satisfaction is our highest priority! For more information on MantelMount patented technology visit: www.mantelmount.com/pages/patents WARNING: This product can expose you to chemicals including Lithium Grease, which is known to the State of California to cause cancer or developmental harm.
Need help?
Do you have a question about the MM-Max1 and is the answer not in the manual?
Questions and answers