Advertisement
Quick Links
1
Flyking Bowl Camera Slider (100mm Bowl) (P-FK-BL)
A s s e m b l y M a n u a l
Available sizes: 2ft, 3ft and 4ft
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
3/8" Threads
75mm
Flyking Precision Camera Slider
Male Adapter
Conversion Ring
Female Adapter
2 x Crossbars
4 x Feet
Bag packing
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for PROAIM P-FK-BL
Summary of Contents for PROAIM P-FK-BL
- Page 1 Flyking Bowl Camera Slider (100mm Bowl) (P-FK-BL) A s s e m b l y M a n u a l Available sizes: 2ft, 3ft and 4ft What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
-
Page 2: Safety Hints
Safety Hints ATTENTION: PLEASE READ THIS BEFORE USING PREVENT SERIOUS DAMAGE TO THE TRACK! NEVER USE THE TRACK IN SAND, DIRT, CAUSTIC, OR SALT WATER ENVIRONMENTS! This will cause irreparable damage to the bearings and rails, requiring complete replacement! DO NOT OVERTIGHTEN CARRIAGE BRAKE! Needlessly over tightening the carriage brake can cause misalignment and severely damage the roller bearings! ONLY USE YOUR HAND TO LOCK OR RELEASE THE CARDELLINI HEAD LOCK! - Page 3 Flyking Bowl Camera Slider Setup • Remove bolt from Hub Locking Knob. • Then insert into the bottom of slider by twisting it. • Mount the Slider on 100mm Tripod Stand (Not Included) and tighten Hub Locking Knob to secure it on stand. •...
- Page 4 Mounting Flyking Slider on Two Tripod Stands NOTE: Mount the Slider on any stand with 3/8”-16 thread. • Attach Quick Release Plate of Tripod Head with 3/8”-16 thread, onto the end foots of Slider. • Now mount the Slider on Tripod Head and lock it properly to ensure a secure connection.
- Page 5 Flyking Slider Mounting on C Stands • Remove both bolts from slider with the help of 3/16” Allen Key (Not Included). • Now, attach the crossbar to the end of the slider. • Then insert the bolt and tighten it with the help of 3/16”...
- Page 6 • Now slider is properly mounted on C stands. YOUR PROAIM FLYCAM BOWL CAMERA SLIDER ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.
Need help?
Do you have a question about the P-FK-BL and is the answer not in the manual?
Questions and answers