Setting For Mobile Radio Interruption - VDO MR6000 Owner's Manual And Mounting Instructions

Other functions

Setting for mobile radio interruption

If this unit is connected to a mobile telephone
via a separately-available cable, telephone calls
can be heard over the vehicle loudspeakers.
The initial factory setting is "OFF".
1. Press the ADJ button h to recall the setting
menu.
2. Press the JOYSTICK k upwards or down-
wards to select "TEL SW", "ON", "OFF" or
"MUTE" which are listed on the tool bar.
OFF:
Normal operation continues while the mo-
bile telephone is used.
Note:
• If OFF is set, disconnect the mobile telephone
from the cable or switch it off.
ON:
Telephone calls can be heard over the loud-
speakers which are connected to this unit.
If telephone calls are heard over the vehicle loud-
speakers, the volume can be set via the VOL button 2.
MUTE:
The unit is switched to mute during a tel-
ephone call.
3. Then press the JOYSTICK to the right or left
to select. Subsequently, press the enter but-
ton in the centre of the JOYSTICK to store
the setting.
4. Press the ADJ button again to return to the
standard display.
34
Setting the vehicle loudspeaker
output for the mobile telephone
* The initial factory setting is "RIGHT".
* Set the mobile radio interruption to "ON" in order to hear
telephone calls.
1. Press the ADJ button h to recall the setting
menu.
2. Press the JOYSTICK k upwards or down-
wards to select "TEL SP". "LEFT" and
"RIGHT" are displayed on the tool bar.
RIGHT:
Telephone calls are heard over the loud-
speaker connected to the right channel of
this unit.
LEFT:
Telephone calls are heard over the loud-
speaker connected to the left channel of this
unit.
3. Press the JOYSTICK to the right or left to se-
lect the desired operating mode. Subse-
quently, press the enter button in the centre
of the JOYSTICK to recall the operating mode.
4. Press the ADJ button again to return to the
standard display.