Entering The Tv Receiver Range; Preset Scan – Scan - VDO MR6000 Owner's Manual And Mounting Instructions

Television operation
Recalling a preset
A total of 12 television stations can be stored
(6 for TV1 and 6 for TV2). Favourite television
stations can thus be set and stored as presets.
1. Actuate the BAND button e to set the de-
sired television band (TV1 or TV2).
2. Actuate the corresponding preset button c
to recall the stored television station.
* Press and hold the one of the preset buttons for at least
2 seconds to store the current station in the preset
memory.
Manual storage
1. Set the desired station by means of automatic
search or manual tuning.
2. Press and hold the one of the preset buttons
c for at least 2 seconds to store the station
in the preset memory.
Automatic storage – AS
With automatic storage, 6 stations are set au-
tomatically and each is stored in a preset
memory.
If 6 stations with good reception are not avail-
able, the stations previously stored are retained
in the memory and only stations with good
reception are stored.
1. Actuate the BAND button e to set the de-
sired television band (TV1 or TV2).
2. Press the AS/SCN button 5 for at least
2 seconds. All stations with high field strength
are then stored under the preset buttons c.
Preset scan – SCAN
With preset scan, each preset can be looked
at briefly before the next preset is automati-
cally recalled. This function is particularly suit-
able for locating a desired television station
in the memory.
1. Press the AS/SCN button 5.
2. As soon as the desired station is received,
press the AS/SCN button again.
30
Switching the video system
between NTSC and PAL
This function is only available with the unit extended.
Set the video system to the applicable televi-
sion standard.
1. Press the ADJ button h to recall the setting
menu.
2. Press the JOYSTICK k upwards or down-
wards to mark "VTR N/P".
3. Press the JOYSTICK to the right or left to
select between "NTSC" or "PAL".
4. Press the enter button in the centre of the
JOYSTICK to store the selected standard.

Entering the TV receiver range

This function is only available with the unit extended.
After entry of the TV reception range, the set-
ting of the TV tuner is changed.
1. Press the ADJ button h to recall the setting
menu.
2. Press the JOYSTICK k upwards or down-
wards to mark "TV AREA". Press the enter
button in the centre of the JOYSTICK to dis-
play the country list.
3. Press the JOYSTICK upwards or downwards
to select the country. Subsequently, press the
enter button in the centre of the JOYSTICK
to store the setting.
4. After setting, press the JOYSTICK to the right
or left to mark "MENU". Press the enter
button in the centre of the JOYSTICK to re-
turn to the setting menu.