VDO MS 4150 RS Installation And Owner's Manual
  1. Manuals
  2. Brands
  3. VDO Manuals
  4. Car Receiver
  5. MS 4150 RS MP3
  6. Installation and owner's manual

VDO MS 4150 RS Installation And Owner's Manual

Hide thumbs Also See for MS 4150 RS:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual , Installation & Owner's Manual
MS 4150 RS
Owner's manual and mounting instruction
Mode d'emploi et manuel d'installation
Bedienungs- und Einbauanleitung
Gebruiksaanwijzing en inbouwhandleiding
Istruzioni d'uso e d'installazione
www.vdodayton.com

Advertisement

Table of Contents
loading

Related Manuals for VDO MS 4150 RS

Summary of Contents for VDO MS 4150 RS

  • Page 1 MS 4150 RS Owner’s manual and mounting instruction Mode d’emploi et manuel d’installation Bedienungs- und Einbauanleitung Gebruiksaanwijzing en inbouwhandleiding Istruzioni d’uso e d’installazione www.vdodayton.com...
  • Page 2 Attention! Only use this system when it is safe to do so. It is more important to keep your eyes on the road and your hands on the wheel. Due to constantly changing traffic conditions, we unfortunately cannot guarantee 100 % precision under all circumstances. Attention ! N’utilisez le système que si vous ne mettez pas en danger votre vie ou celle des autres usagers de la route.
  • Page 3 SDVC +12V Remote Car Multimedia Systems VDO Dayton. The Car Brand. +30˚ -10˚ www.vdodayton.com...
  • Page 5 Illustrations ....Page 3 Contents..... Page 7 Mounting instructions .

  • Page 7: Table Of Contents

    CONTENTS INSTALLATION INSTRUCTIONS ....... . 9 GENERAL INFORMATION ........15 Notes on operating instructions .
  • Page 8 CONTENTS C-IQ – INTELLIGENT CONTENT ON DEMAND......38 C-IQ - Your key to map, traffic and travel information ....38 NAVIGATION .

  • Page 9: Installation Instructions

    Do not cut non-assigned wires. Instead, wind them together and secure to one side. They may be required for retrofitting additional functions. The wire colours used in the installation instructions correspond to the VDO Dayton standard. Depending on the manufacturer of the connecting and adapter cables, they...
  • Page 10 INSTALLATION INSTRUCTIONS Connection overview, ISO chamber A, Fig. 2: Note: The cable colours correspond to the VDO Dayton standard. Wire colour Connection Orange Input speedometer signal / SDVC Green Switch input reversing signal (reversing light plus) Purple Switch input telephone mute function Red/Yellow + 12 V permanent positive;...
  • Page 11 Ask your dealer for the appropriate adapter cable. Blue connector C3 (CD changer): You can connect a digital VDO Dayton CD changer to the unit. For further information refer to the installation instructions for the CD changer.
  • Page 12 INSTALLATION INSTRUCTIONS Installing the GPS antenna, Fig. 7 The GPS antenna may be installed in the passenger compartment, for example on the dashboard or the rear shelf. The antenna needs to have unrestricted “visual contact” to the sky. – Clean the mounting surface and attach the antenna with the double-sided adhesive tape.
  • Page 13 INSTALLATION INSTRUCTIONS Initial operation, Fig. 12 1. Reconnect the battery. 2. Restore complete functioning of the electrical system (clock, trip computer, alarm system, airbag, immobiliser, etc.). 3. Switch on the ignition. 4. Insert the map CD in the radio. To register the system and activate map, travel and/or traffic info, see the operating instructions, Section “C-IQ”, page 38.
  • Page 14 The current vehicle location can then be checked in the emergency menu (see operating instructions, page 62). Hotline Hotlines are available in many countries to handle queries about the VDO Dayton multimedia systems. Up-to-date telephone numbers can be found in the accompanying info sheet.

  • Page 15: General Information

    GENERAL INFORMATION Notes on operating instructions The following reading aids are used to simplify these operating instructions: requests you to perform an action. shows the unit’s reaction. provides additional information – identifies a list. Safety instructions and warnings contain important information for the safe use of the unit.

  • Page 16: Route & Sound - Navigating And Listening To An Audio Cd

    GENERAL INFORMATION Route & Sound - Navigating and listening to an audio CD With the new generation of our navigation radio units, you may insert a map CD, plan your route, then insert an audio CD and the system will still guide you to your intended destination.

  • Page 17: The Digital Road Map

    GENERAL INFORMATION Comments After transport of the vehicle by train or ferry, the navigation system may require a few minutes for exact positioning. After disconnecting the vehicle battery, up to 15 minutes may be required for exact positioning. For this, the vehicle must be outdoors and the system must be switched on in order to receive transmissions from the GPS satellites.

  • Page 18: Safety

    SAFETY The system has the following safety functions to prevent theft: Security code The navigation radio can be protected against theft with a security code. The unit is disabled as soon as it is disconnected from the voltage supply (e.g. if it is stolen). It can only be reactivated by entering the security correct code.

  • Page 19: Preface

    PREFACE RDS (Radio Data System) Many FM stations transmit RDS information. The navigation radio evaluates the RDS telegram and offers the following advantages: – PS (Program Service Name): Display of station name, – PTY (Program TYpe): Station selection by program type, page 31 –...

  • Page 20: Operation

    OPERATION Control elements MUTE ALT-R BAND RADIO MS 4150 CD.C SOUND CLEAR POWER VOLUME SCAN 1 o ... . Release button for operating panel 2 SOUND ..Opens the “ ”...

  • Page 21: Displays

    OPERATION Displays In radio mode: : Traffic Announcements / TMC (see “INFORMATION” menu) Time CD icon flashes: route is being planned. Do not remove map CD! Waveband Preset number Frequency Selected search sensitivity (for automatic search tuning) Program (Station) name Selected search mode (only with RDS stations) In CD player mode:...

  • Page 22: Inserting A Cd

    OPERATION Inserting a CD 1. Open the front panel. 2. Insert the CD into the drive (printed side up). For audio CDs, playback starts automatically. 3. Close the front panel. Removing a CD 1. Open the front panel. 2. Press the eject button. 3.

  • Page 23: Menu Operation

    OPERATION Menu operation Cursor The currently selected line or field on the screen is designated as the cursor. The cursor is identified by an inverse field (bright letters on black background). Move the cursor by turning the right rotary control. Confirm by pressing the right rotary control.

  • Page 24: Entering Letters

    OPERATION Entering letters Characters are entered by selecting letters from a list. In the following, this type of entering will simply be called “typewriter”. Move the cursor to the desired letter by turning the right rotary control. ‰ ® – Confirm by pressing the right rotary control.

  • Page 25: Information" Menu

    “INFORMATION” MENU The “INFORMATION” menu The “ ” menu allows you to configure the type and amount of information the unit will receive via the radio data system (RDS). Press the INFO button. The “ ” menu is displayed. The following options are available: TMC Scan (Traffic Message Channel) If you activate this function, the automatic search will only look for stations transmitting TMC information and will ensure that you receive as much TMC data as...
  • Page 26 “INFORMATION” MENU Behaviour of TMC and TA If you switch on TMC Scan, you ensure that the radio will only search for stations transmitting TMC data during the automatic search. If the reception quality of the TMC station deteriorates drastically, the unit will indicate this by outputting a warning message.

  • Page 27: Sound Settings

    SOUND SETTINGS The “SOUND” menu In the “ ” menu, you can set your navigation radio’s sound and several other sound reproduction parameters to your own preferences. The sound settings for bass and treble/tone are valid for the currently active sound source (radio, CD or CDC).
  • Page 28 SOUND SETTINGS Sound Setup Setting one of the following functions: – : Reset the sound setting to the factory-set values and switch off loudness. – Activate this function to equalise volume differences between the various sound sources. – Set the enhancement of low tones at loudness. –...

  • Page 29: Radio

    RADIO Radio Listening to radio If the unit is not yet in radio mode: Press the RADIO button. Select waveband In radio mode: Press the RADIO button again. Select the desired waveband and press the right rotary control. The following wavebands are available: FM A, FM B, FM AST (Autostore) MW, MW AST (Autostore), SW and LW.

  • Page 30: The "Radio" Menu

    RADIO Presets You can store 6 stations for each waveband on the preset buttons from 1 to 6. Tune to the desired waveband and station. Press the desired preset button until you hear a confirmation tone. The station selected is stored on the preset button. Stations cannot be stored manually in the FM AS and MW AS wavebands, these are used exclusively for the Autostore function.
  • Page 31 RADIO PTY Search (only on FM) This function allows you to search for stations of the desired program type. Select the desired program type from the list. Press the right rotary control to start the PTY search. PTY is not supported by all RDS-stations and is not available in all countries. Radio Setup Set one of the following functions.

  • Page 32: Cd Player

    CD PLAYER CD player You can play 12 cm audio CDs on your CD player. We strongly recommend only playing 12 cm CDs. Please do not use 8 cm CDs (neither with nor without adapter). On no account must unusually-shaped CDs be inserted into the player. If you ignore these recommendations, you risk damaging your unit.

  • Page 33: The "Cd" Menu

    CD PLAYER The “CD” menu In CD player mode : Press the MENU button. The “ ” menu is displayed. The following functions are available: Random Activate this function to listen to the tracks on the currently selected CD in random order.

  • Page 34: Cd Changer

    CD CHANGER CD changer (accessories) A digital VDO Dayton CD changer can be connected to the navigation radio. We strongly recommend only playing 12 cm CDs. Please do not use 8 cm CDs (neither with nor without adapter). On no account must unusually-shaped CDs be inserted into the player. If you ignore these recommendations, you risk damaging your unit.

  • Page 35: The "Cd Changer" Menu

    CD CHANGER The “CD CHANGER” menu In CD changer mode: Press the MENU button. The “ ” menu is displayed. The following functions are available: Random Activate this function to listen to the tracks on the currently selected CD in random order.

  • Page 36: Initialisation

    INITIALISATION The “INITIALISATION” menu Select “ ” in one of the following menus: “ ”, “ ”, “ ” or “ ”. The “ ” menu is displayed. The “ ” menu allows you to adjust the navigation radio to your needs. The following functions are available: Telephone Adapt your unit’s telephone input to your car phone:...
  • Page 37 INITIALISATION Scan Time The playing time for the scan function for the radio (station) and CD/CD changer (title). Choose 5, 10 or 15 seconds. On Off logic Activate this function to limit the operation of the device to one hour after the ignition key is removed.

  • Page 38: C-Iq - Intelligent Content On Demand

    C-IQ – INTELLIGENT CONTENT ON DEMAND C-IQ - Your key to map, traffic and travel information Your navigation radio is supplied with a CD containing the latest version of the map software along with travel and traffic information (for dynamic navigation). The information on the CD is encrypted and can be partially or completely activated for a defined period with the aid of an access code.

  • Page 39: Activating Products

    C-IQ – INTELLIGENT CONTENT ON DEMAND Activating products Once you have received your enable code, enter it into the system. In the main control menu, select “ C-IQ” then “Code Input”. The cursor appears automatically on the first digit Code Input of the code.
  • Page 40 C-IQ – INTELLIGENT CONTENT ON DEMAND Preview Together with your map and travel information software you will also receive the opportunity to inspect different products free of charge before ordering them. You can have the system display the status of this preview: Select “...

  • Page 41: Navigation

    NAVIGATION Main control A map CD must be inserted into the CD player for some of the functions in navigation mode. If the unit is not yet in navigation mode: Press the NAV button. The navigation main control is displayed. The following items are available in the main control: Destination input Opens the “...

  • Page 42: Destination Input

    NAVIGATION Destination input Destinations may be entered in several ways: – Entering city, road and house number or junction by means of the “typewriter.” See the following page. – Loading an address stored in the personal address book. See page 60. –...
  • Page 43 NAVIGATION Entering a new address An input wizard will help you enter a new address. It will lead you step by step through all the necessary entries such as country, city, road, house number or junction and required routing criterion. step: City or postal code Select “...
  • Page 44 NAVIGATION step: Road Once the city has been entered the input wizard automatically jumps to the “ ” input menu. Enter the name of the road using the “typewriter” or select a name from the list using step: House number or junction If house numbers are available for a selected road, they can be entered with a separate input menu.

  • Page 45: Special Destinations (Pois)

    NAVIGATION Special destinations (POIs) You may also input the destination address by selecting special facilities (POI = Points of Interest) stored in the database. These include e.g.: – airports, – hotels, – petrol station, – car repair garages – car parks, etc. Depending upon the information already entered in the destination input screen, a list of general interest facilities appears which are present on the current map CD.
  • Page 46 NAVIGATION Special facilities in the vicinity of the current position You may also set a destination address by selecting a special facility in the vicinity of the current vehicle location. Select “ ” in the destination input menu. A list of categories of special facilities is shown. Select the required category.

  • Page 47: Via Point Input

    NAVIGATION Via point input If you wish to visit other locations en route to the entered destination address, these can be stored as via points. The navigation system then plans the route to include the via points in the given sequence before the destination address is reached.
  • Page 48 NAVIGATION Delete via points not reached Via point which you have not reached or which are no longer desirable to you must be deleted from the via point list so that the navigation system may plan the route to the next via point or to the final destination.

  • Page 49: Guidance

    NAVIGATION Guidance The guidance screen appears as soon as you activate the guidance. The guidance screen displays the following information: 1 Road direction arrow: The arrow indicates the course of the road. 2 Simplified presentation of the next turn-off prompt. 3 Turn-off prompt: A graphic display of the next junction or turn-off.

  • Page 50: Audible Messages

    NAVIGATION Audible messages During guidance, the navigation radio will provide acoustic routing information in addition to the symbols on the guidance screen. Commonly, the directive to turn into another road consists of two voice messages: an early warning e.g. “Right turn ahead” the instruction to turn e.g.
  • Page 51 NAVIGATION On longer route segments without turnoffs or junctions, an arrow is displayed indicating the course of the road over the next 100 m. In addition, a reduced diagram of the next turn-off prompt appears on the left, above the route direction arrow. Thus, the driver is always warned in advance of the next change of direction.

  • Page 52: Route Selection

    NAVIGATION Route selection During guidance, you may also modify the route criterion and activate or deactivate dynamic route planning. The system will then plan a new route taking into account the new setting of the current position of your car. In the guidance screen, select the symbol for route selection (on the basis of the setting in the destination input U, V, W or X).

  • Page 53: Information During Guidance

    NAVIGATION Information during guidance During guidance, you can call up several information screens: Move the cursor to the symbol and confirm. The list of information menus appears. The following information menus are available: Route list This option is available as soon as a route has been planned.
  • Page 54 NAVIGATION Displaying/deleting via points If via points have been entered for the current destination, the “ ” option will be active. The number of via points still to be reached also appears. Select the required via point from the list in order to view details or delete it.

  • Page 55: Traffic Information

    NAVIGATION Trip computer The following information appears in the “Trip computer” information menu: – Current speed – Average speed – Maximum speed so far – Distance travelled – Time travelled Resetting values: Confirm with “O”. Confirm the deletion with “ ”.
  • Page 56 NAVIGATION Viewing details relating to traffic information Select the required traffic report from one of the three lists (“At position”, “At destination”, “On the route”) in order to view details relating to traffic information. The first details screen appears: The following information is available: –...

  • Page 57: Dynamic Guidance With Tmc

    NAVIGATION Dynamic guidance with TMC With RDS TMC (Traffic Message Channel), the current traffic situation is taken into account when planning the route to your destination. You will be informed, for example, of accidents, congestion or construction sites as soon as such a traffic situation occurs. If you approach the traffic obstruction, the automatic detour option is activated and the navigation system will plan, if required, an alternative route.

  • Page 58: Dynamic Route Planning

    NAVIGATION Bypassing a traffic obstruction locally When you approach the last exit before reaching a traffic obstruction, the navigation system will alert you and offer you the option of planning a detour route. As soon as a traffic obstruction is detected on your route and the detour option is displayed on the guidance screen: Confirm the detour option in the top line of the guidance screen.

  • Page 59: Alternative Route

    NAVIGATION Alternative route During guidance, you can cause the navigation system to plan an alternative route. Use this function if, for example, you want to avoid stationary traffic not reported via TMC or if you wish to plan an alternative route. The alternative route will be calculated for a selectable distance from the current position of the car.

  • Page 60: Address Manager

    NAVIGATION Address manager The navigation radio offers the opportunity of storing at least 30 destination addresses in a personal address book. In the address book, you can store your destinations separately under the categories “Private” and “Business”. The “Home” and “Work” shortcuts, which can be programmed with your home address and business address respectively, are also available here.
  • Page 61 NAVIGATION Store current loc. Would you like to store a favourite restaurant in the destination memory? You can store the current position of your car as follows: Select “ ” in the address manager. Select which address books the address should be stored in (private, business, home or work).

  • Page 62: Emergency Menu

    NAVIGATION Emergency menu In the main control, select “ ”. The “ ” menu is displayed. The following options are available in the “ ” menu: GPS position Display of the current geographic vehicle location as calculated by the Global Positioning System.

  • Page 63: System Settings

    NAVIGATION System settings To customise the navigation functions to your own needs, you can change several settings. In the main control, select “ ”. The “ ” menu is displayed. The following information screens are available: Speed In the “ ”...
  • Page 64 NAVIGATION Guidance screen Here you can select the information which should appear on the guidance screen. Show event Select whether traffic obstructions on your route should appear in the top line of the guidance screen or not. Remain. distance Select whether the distance-to-go to the destination or via point should appear in the status field of the guidance screen or not.

  • Page 65: Default Settings

    NAVIGATION Language Choose one of the two languages loaded in the system, Select “ ” to replace one of the two loaded languages with another language from the system software CD (included). Select the language to be replaced. You will be prompted to insert the software CD. Insert the language CD in the CD player of the radio.

  • Page 66: Loading Software Updates

    NAVIGATION Loading software updates In order to extend the range of functions provided by the unit, you can load new software versions from a software update CD, if available for your navigation radio: Switch on the radio. Open the front and remove the CD if still inserted. Insert the software update CD into the CD player.

  • Page 67: Troubleshooting

    Unit not functioning / Not suitable for VW/Audi The power supply connector pin assignment for VW and Audi is not the same. vehicles • Use the VDO Dayton MA1910 adapter for the connection. Display still showing “INIT”. Will not function. The unit is faulty.
  • Page 68 • Check that you have inserted a map CD which contains C-IQ data. Map CDs without C-IQ will not be accepted by the system. Hotlines are available in many countries to handle queries about the VDO Dayton multimedia systems. Up-to-date telephone numbers can be found in the accompanying info sheet.
  • Page 69 Car Multimedia Systems. 3151609291 VDO Dayton. The Car Brand. 3112 316 0929.1 04/2003 ri...

Table of Contents