Entering The Tv Diversity; Switching The Tv Picture Format; Adjusting Brightness, Colour And Hue - VDO MR6000 Owner's Manual And Mounting Instructions

Entering the TV diversity

This function is only available with the unit extended.
Normally, the "ON" position should be selected for TV
DIVERSITY.
The reception setting of the TV antenna which
is connected to the TV tuner can be changed.
1. Press the ADJ button h to recall the setting
menu.
2. Press the JOYSTICK k upwards or down-
wards to select "TV DIVER".
3. Then press the JOYSTICK to the right or left
to select "ON" or "OFF". Press the enter
button in the centre of the JOYSTICK to store
the selected setting.
ON: Always selects the antenna with the
best signal for optimal reception (for multi-
ple antennae).
OFF: Switches TV diversity off (only the
antenna connected to "MAIN" is used).
4. Press the ADJ button to return to the pre-
vious operating mode.
Adjusting brightness, colour
and hue
Note:
• These functions can only be performed when the
vehicle is stationary and the parking brake is
applied.
• This function is only available with the unit
extended.
• HUE can only be set in NTSC mode.
1. Press the BAND button e to recall the set-
ting menu.
2. Press the JOYSTICK k upwards or down-
wards to select the option "MONI ADJ"
(screen setting).
3. Press the enter button in the centre of the
JOYSTICK.
4. Press the JOYSTICK to the right or left to
select between "BRIGHT", "COLOR" and
"HUE".
Television operation
"BRIGHT": Determines the brightness of
the display picture.
"COLOR": Determines the colour satura-
tion.
"HUE": Determines the hue (ratio of red
to green component).
5. Press the JOYSTICK upwards or downwards
to adjust the level.
6. After setting, press the JOYSTICK to the right
or left to access "MENU". Subsequently, press
the enter button in the centre of the JOY-
STICK to return to the setting menu.

Switching the TV picture format

This function is only available with the unit extended.
1. Press the WIDE button j to change the TV
picture format. Repeated pressing of the
WIDE button changes the picture size in the
following sequence:
"NORMAL" –> "WIDE" –> "F. WIDE" –>
"CINEMA" –> "NORMAL"
"NORMAL": (normal format)
A black stripe is visible at the right and left
edges of the screen.
For normal programme formats (4:3) etc., the
entire television picture appears undistorted.
"WIDE": (wide picture mode) The picture
is stretched horizontally at the right and left
edges.
"F. WIDE": (full width picture mode) The
entire picture is stretched horizontally.
"CINEMA": (cinema mode) The upper and
lower borders of the picture disappear.
Note:
• If pictures are shown in normal 4:3 format in wide
picture or full width picture mode, part of the
border is cut off or appears distorted. Original
pictures can always be shown in normal mode,
independent of format.
• Full width picture mode is best suited to pictures
with sub-titles.
31