Radio Operation; Listening To Radio - VDO MR6000 Owner's Manual And Mounting Instructions

Listening to radio

1. Actuate the FUNC button 1 and set radio
mode. The frequencies or, in the case of RDS
stations the programme names, are dis-
played.
2. Actuate the BAND button e and set the
waveband. Each time the button is actuated,
the waveband is changed in the following
sequence:
FM1 –> FM2 –> FM 3 –> AM (MW/LW) –>
FM1...
3. Actuate SEARCH button 2 on right or left
side to set the desired station.
Tuning
There are 3 types of tuning:
– Automatic search,
– manual tuning and
– preset tuning.
Automatic search
There are 2 types of automatic search:
DX SEEK and LOCAL SEEK.
DX SEEK enables tuning of all receivable sta-
tions (including distant stations); LOCAL SEEK
on the other hand, restricts the search to strong
station signals.
1. Actuate the BAND button e and set the
desired waveband. (FM or AM (MW/LW))
2. Tuning to a station.
* If "MANU" is illuminated on the screen (or if the unit
is retracted and the display "SRCH" is extinguished),
press the BAND button for at least 1 second. "MANU"
is then extinguished on the display (or the display
"SRCH" illuminates if the unit is retracted) and the
search function is then available.
* The unit automatically searches for TA stations if "TA"
illuminates on the display.
DX SEEK
Actuate SEARCH button 2 on right or left side
for automatic tuning.
If the SEARCH button is actuated on the right,
the unit searches for stations of a higher fre-
quency; if the SEARCH button is actuated on
the left, the unit searches for stations of a lower
frequency.
* "DX SEEK" appears on the display when the tuning is
started.

Radio operation

LOCAL SEEK (local automatic search)
A search for stations with strong signals is per-
formed (local stations) if the right or left side
of the SEARCH button is pressed for at least 1
second. Only stations with a clear received sig-
nal are tuned.
* "LO SEEK" appears on the display when the local automatic
search is started.
Manual tuning
There are 2 types of tuning: Quick tuning and
step-by-step tuning.
With step-by-step tuning, the frequency
changes stepwise. With quick tuning, the de-
sired frequency can be set quickly.
1. Actuate the BAND button e and set the
desired waveband. (FM or AM (MW/LW))
* If "MANU" is extinguished on the screen (or if the unit
is retracted and the display "SRCH" is illuminated),
press the BAND button for at least 1 second. "MANU"
then appears on the display (or the display "SRCH" is
extinguished if the unit is retracted) and manual tuning
is then possible.
2. Tuning to a station.
Quick tuning:
Press the SEARCH button 2 on right or left
side and hold for at least 1 second to set a
station.
Step-by-step tuning:
Actuate the SEARCH button on right or left
side to set a station manually.
Note:
• Manual tuning is cancelled if no button is pressed
within 7 seconds.
21