Eureka NES210 Series Manual
Also See for NES210 Series:

Advertisement

Eureka NES210 Series Manual

Important instructions

For easy assembly, please take a few moments to read this owner's guide.

If you have questions about your new vacuum, please contact our customer service HELPLINE at 1-800-282-2886.
We're here to help!

Where to find important vacuum information

Keep this information
Write the model, type and serial number:

  • Date of purchase (keep your receipt)
  • Model number and type
  • Serial number

Find these numbers on a label on the middle back side of the vacuum cleaner. Refer to these numbers when ordering parts and accessories or if service is needed.

This Owner's Guide provides important instructions to prolong the life of your Eureka vacuum cleaner.

Registration: To register your product visit www.eureka.com and click on the 'Register Your Product' link in the top right corner.

Inspection: Carefully unpack and inspect your new Eureka vacuum cleaner for shipping damage. Each unit is tested and thoroughly inspected before shipping. For instructions regarding any shipping damage, call Eureka Customer Service HELPLINE 1-800-282-2886 immediately.

warning Follow caution information wherever you see this symbol.

What comes in the carton

How to identify parts of your vacuum cleaner

How to identify parts of your vacuum cleaner - Part 1

For filter maintenance instructions, see "How to maintain dust cup and filters"
How to identify parts of your vacuum cleaner - Part 2

How to assemble your vacuum cleaner

  1. Attach crevice tool and holder by sliding it up onto the handle.
  2. Press the quick release button on the hand vacuum grip and insert the handle. Make sure it is all the way inserted into the body of the vacuum.
  3. Attach the floor nozzle by inserting it into the opening at the bottom of the dust cup. Press firmly to secure in place.
  4. Wrap cord around the upper and lower cord wraps on the back of the vacuum. Clip plug onto the cord.
  5. Tilt vacuum up into its upright position. Click!

How to use your vacuum cleaner

  1. Plug power cord into the outlet.
  2. Turn on power switch on the front of the hand vacuum.
  3. Step on nozzle and tilt vacuum to release from its upright position.

Additional usage methods

  1. Turn hand vacuum 180° as shown for better reach under furniture.
  2. Floor nozzle may be used with the hand vacuum to clean wider surfaces.
    To attach floor nozzle to the hand vacuum, insert it into the opening at the bottom of the hand vacuum. Press firmly to secure in place.
  3. Insert crevice tool to extend the length and reach of the hand vacuum.

How to maintain dust cup and filters

  1. Turn vacuum off. Then, unplug the vacuum.
    How to maintain dust cup and filters - Step 1
  2. To remove dirt from the dust cup and filter, hold vacuum vertically. Press dust cup latch to release the dust cup as shown.
  3. Gently remove the filter as shown.
  4. Empty dust cup into waste container.
    How to maintain dust cup and filters - Step 2
  5. Replace filter. Attach dust cup to vacuum. Make sure dust cup is correctly secured.

Maintaining pre-motor filter

  1. To optimize suction and cleaning performance, remove and inspect the pre-motor filter regularly.
  2. If needed, clean with warm water and a mild detergent.
  3. Air dry pre-motor filter for 24 hours before placing back in the vacuum.
    Maintaining pre-motor filter

Problem Solving

warning Make sure vacuum is turned off and power cord is unplugged.

Problem Solution
Motor will not start.
  1. Push plug securely into outlet, try another outlet, or check circuit breaker.
Vacuum cleaner does not vacuum effectively.
  1. Filters may be clogged, wet, or dirty. Follow instructions for cleaning filters.
  2. Dust cup may be full. Follow instructions for emptying dust cup.
Dust blows out of air vents.
  1. Ensure filters are properly secured.

Parts and Accessories

Parts and Accesories

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER

warning To reduce the risk of fire, electric shock, or injury:

  • Do not use outdoors or on wet surfaces.
  • Do not leave vacuum cleaner when plugged in.
    Turn off the switch and unplug the electrical cord when not in use and before servicing.
  • Do not allow to be used as a toy. Close attention is necessary when used by or near children.
  • Use only as described in this manual.
    Use only manufacturer's recommended attachments.
  • Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, call the Eureka Customer Service HELPLINE at 1-800-282-2886.
  • Do not pull or carry by cord. Do not use cord as a handle. Do not close a door on cord or pull cord around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.
  • Do not use extension cords or outlets with inadequate current carrying capacity.
  • Turn off all controls before unplugging.
  • Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
  • Do not handle plug or vacuum cleaner with wet hands.
  • Do not put any objects into openings. Do not use with any openings blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
  • This vacuum cleaner creates suction.
    Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
  • Use extra care when cleaning stairs.
  • Do not pick up anything that is burning or smoking such as cigarettes, matches, or hot ashes.
  • Do not use without dust cup, filter, and pre-motor filter in place.
  • Do not use to pick up flammable or combustible liquids such as gasoline, or use in areas where they may be present.
  • Store your vacuum cleaner indoors in a cool, dry area.
  • Keep your work area well lighted.
  • Unplug electrical appliances before vacuuming them.

SAVE THESE INSTRUCTIONS

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

Motor

Do Not Oil the motor at any time. The bearings are permanently lubricated and sealed.

www.eureka.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Eureka NES210 Series Manual

Advertisement

Need help?

Need help?

Do you have a question about the NES210 Series and is the answer not in the manual?

Questions and answers

Table of Contents