Assa Abloy Corbin Russwin 3357T Installation Instructions

Installation Instructions
3357T Auxiliary Control
Used With ED3457 Pull Trim,
Vertical Rod Exit Devices
FM375 (06/14)
1. DESCRIPTION
Auxiliary Control works with ED3457 Surface Vertical Rod Exit Devices. The Auxiliary Control enables the night latch function for
pull trim applications.
Key unlocks turn; turn retracts latch/
3357T
Turn relocks when key is removed
2. OPERATION
The Auxiliary Control is operative only when the key is in the cylinder and turned. See Fig. 4 for cylinder replacement information.
3. INSTALLATION INSTRUCTIONS
1. Using the exit device instructions, prepare the door for the exit device (Fig. 1).
2. Prepare the door for the Auxiliary Control (Fig. 2).
3. Slide top rod into lever assembly and position lever as indicated (Fig. 2). Adjust top rod according to exit device instructions.
4. Mount Auxiliary Control to door using two through screws provided.
5. Set lever on top rod so that thumb turn retracts top and bottom rod; then tighten set screws securely.
INSIDE FACE
OF DOOR
2X C'SINK #10
SCREWHEAD
1/2"
5/8"
THRU
DOOR
FULL R
5/8"
3/8"
1/2"
4-1/4"
FOR LOCATION
OF CASE SEE
METAL DOOR
TEMPLATE FOR
THE DEVICE
FM375 (06/14)
OUTSIDE FACE
OF DOOR
2X Ø7/32"
1"
1/2"
FULL R
3/4"
1-3/8"
THIS SIDE OF
DOOR ONLY
(1" DEEP FOR
WOOD DOOR)
Fig. 1
In U.S.:
Corbin Russwin, Inc.
225 Episcopal Road
Berlin, CT 06037 USA
www.corbinrusswin.com
Technical Product Support: Phone: 888-607-5703
TOP
ROD
SET
SCREW
LEVER
ASSEMBLY
DOOR
INSIDE
Copyright © 2014 Corbin Russwin Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
ASSA ABLOY
In Canada:
ASSA ABLOY Door Security Solutions Canada
160 Four Valley Drive
Vaughan, Ontario, Canada L4K4T9
www.assaabloy.ca
AUXILIARY
CONTROL
THUMB
TURN
DOOR
OUTSIDE
Fig. 2
1 of 2
®