TESmart HDK402 Master 24 User Manual

4x2 hdmi+dp8k

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

User

4x2

Manual

HDK402 Master 24

English

HDMI+ DP 8K

KVM Switch

HDK402 Master 24

Table of Contents

Need help?

Do you have a question about the HDK402 Master 24 and is the answer not in the manual?

Questions and answers

Summary of Contents for TESmart HDK402 Master 24

Page 1 User HDMI+ DP 8K KVM Switch Manual HDK402 Master 24 HDK402 Master 24 English...
Page 3 English...
Page 5: Copyright Notice
The ownership of the trade names and brand names adopted in this user manual belongs to their companies. Product Information For more information about TESmart products and how they can help you to enjoy your job, please visit the following TESmart website or contact an TESmart Authorized Reseller. www.tesmart.com...
Page 6: Table Of Contents
Contents 1. Safety Tips and Warnings ··································01 9.3 Built-in Network Switch 2. Battery Description···········································02 9.4 Lock L/R Audio and USB Focus Function 3. Warranty Information········································03 9.5 Auto Scan Mode Description 4. Preface··························································04 9.6 Mouse Wheel Switching 5. Features·························································05 Operation Method ···········································25 6.
Page 7: Safety Tips And Warnings
1. Safety Tips and Warnings Tips: Please read the safety tips and warnings for dual monitor KVM Switch comprehensively before use. Use this produce in accordance with its instructions, safety tips and warnings to prevent unnecessary damage to the product and potential dangers to users. Keep the product away from water.
Page 8: Battery Description
2. Battery Description Tips: By default, the remote control is not equipped with batteries, due to the safety requirements of some express companies. Install AAA dry cells before use. Caution: Improper disposal of the lithium battery may cause an explosion. Do not throw the battery into ﬁre.
Page 9: Warranty Information
3. Warranty Information We warrant this product as free of defects in material and workmanship for a period of one (1) year from the date of shipment. If during the period of warranty this product proves defective under normal use, we will repair or replace this product, provided that this product has not been subjected to mechanical, electrical, or other abuse or modiﬁcations.
Page 10: Preface
Tips: If you need to control more computers or conduct more complex and professional switching, you can also choose other products of our company. For more details, please visit our oﬃcial website: www.tesmart.com.
Page 11: Features
5. Features Using 2 monitors, 1 set of keyboard and mouse to control 4 computers Ÿ HDMI 2.1 compliant, has 48Gbps bandwidth and also support VRR, FVA and ALLM Ÿ Support resolution up to 8K(4320p)@60Hz 4:4:4 and is backward compatible with Ÿ...
Page 12: Packing List
6. Packing List 1 * 4x2 HDMI+DP Dual Monitor KVM Switch Ÿ 4 * KVM Cables Ÿ 4 * DP Cables Ÿ 1 * IR Remote Control Ÿ 1 * DC 12V Power Adapter Ÿ 1 * User Manual Ÿ Tips: After receipt of the product, please check the packing list carefully to make sure that no components have been lost and no damage to the product has been caused during transportation.
Page 13: Panel Description
7. Panel Description Name Function 3.5mm audio/mic Integrated microphone and L/R audio output. USB 3.2 Gen 1 ports Connect to USB 3.0 devices. Color LCD Display current status and function settings. Keypad Press to control the KVM. Please refer to Chapter 10.1 for the detail.
Page 14 Name Function IR Receiver Receive IR remote signal. Power switch Turn on or turn oﬀ power supply.
Page 15 9 10 Name Function DC 12V 12V DC power supply. Insert the network cable into this port to let the 2 input PCs to connect LAN port to the local network area. Support external UART commands for channel switch and UART command interface functionality control.
Page 16 9 10 Name Function USB 3.2 Gen 1 ports Connect to USB 3.2 devices. HDMI outputs Connect to 2 HDMI displays for video output. 2 PCs can be connected to the KVM at the same time. Each group contains 1 HDMI ports (marked as Input A) , 1 DP ports KVM input ports group (marked as Input B) and a USB port.
Page 17: Connection Description
8. Connection Description 8.1 Connection Diagram Hard disk drive Driver Monitor 2 Monitor 1 Headset Ethernet Keyboard Router Mouse Switch PC 4 PC 3 PC 2 PC 1 Tips: For your better experience, please use HDMI 2.1 cables to connect to the displays.
Page 18: Connection Preparation
8.2 Connection Preparation Take into consideration all devices required to be connected and prepare a workbench large Ÿ enough before the connection. Lay out the cables properly to facilitate the layout of power supply as a lot of power sockets Ÿ...
Page 19: Connection Steps
8.3 Connection Steps 1. Connect PC 1 with 1 KVM cable and 1 DP cable. 2. Connect PC 2~4 with the same method. 3. Connect KVM's HDMI output ports to 2 HDMI displays with 2 HDMI cables.
Page 20 4. Use 1 network cable, one end is connected to the RJ45 port, the other end is connected to a switch or a router. 5. Connect external mouse and keyboard to KVM's keyboard and mouse input port.
Page 21 6. Connect USB 3.0 devices to KVM's standard USB 3.2 ports. 7. Connect external audio device to KVM's L/R out port.
Page 22 8. Connect the power cable to KVM's DC 12V port and plug it to a power socket. 9. By now, the connection has been completed. Turn on the power supply and the KVM Switch will begin to work. Tips: 1. By default, the network cable is not included in the package. 2.
Page 23: Kvm Workbench
8.4 KVM Workbench A workbench with 4x2 dual monitor KVM Switch successfully connected is shown as below:...
Page 24: Function Description
9. Function Description 9.1 Display Mode Description The 4x2 HDMI+DP dual monitor KVM Switch support 2 display modes. You can choose to implement 2-screen extended display or duplicate display or display diﬀerent PCs on 2 monitors. Display Mode 1: Display the same PC Duplicate displays Extend displays Display A...
Page 25 Display Mode 2: Display the diﬀerent PCs Display A Display B PC 1 PC 2 In this mode, you can show one PC on any two monitors connected to the KVM and the other PC on the remaining monitor. Use the front panel, hotkeys, or IR control to switch between PCs and monitors.
Page 26: Keyboard And Mouse Emulation Mode
9.2 Keyboard and Mouse Emulation Mode We provide two keyboard and mouse modes: Pass Through Mode and Legacy Emulation Mode. Pass Through mode supports most keyboard and mouse drivers and multifunction keyboards and mice. Legacy Emulation Mode ensures the normal functioning of the keyboard, mouse, and hotkey features.
Page 27: Built-In Network Switch
9.3 Built-in Network Switch The 4x2 KVM Switch have a built-in USB Ethernet Adapter, which adds a standard RJ45 port to all the PC that is connected to the KVM and allows you to connect your computers to a router or network switch for gigabit wired network connection. Full 1000Mbps Ethernet for fast, stable data transfer, more reliable than most wireless connections.
Page 28: Lock L/R Audio And Usb Focus Function
9.4 Lock L/R Audio and USB Focus Function The 4x2 KVM Switch supports locking L/R audio and USB 3.0 focus. After the lock is turned on, the current audio or USB focus can be maintained and only the screen can be switched when switching;...
Page 29: Auto Scan Mode Description
9.5 Auto Scan Mode Description The Auto Scan feature can automatically switch the display at regular intervals between all the input ports. As a result, any input devices connected to each port can be monitored without user intervention. Auto scan mode is oﬀ by default. You can turn on the auto scan mode through the front panel keypad, keyboard hot key, infrared remote control, etc.
Page 30: Mouse Wheel Switching
9.6 Mouse Wheel Switching Mouse wheel switching method can quickly switch input sources by mouse operation, double-click the mouse wheel to switch to the next input port. Mouse wheel switching mode is oﬀ by default. You can use keyboard hotkey command to turn on mouse wheel switching mode.
Page 31: Operation Method
10. Operation Method 10.1 Front Panel Button Switching Method When you use the front panel button or IR remote to control the KVM, the LCD display will inquiry your target action, then execute the command according to your operation. The LCD interface in the ﬁgure above is the main interface.
Page 32 Schematic table of LCD interface and panel icons: Icons Meaning and function Monitor A and B. Audio focus icon, indicating the PC where the external audio focus is currently located. USB focus icon, indicating the PC where the external USB 3.0 device focus is currently located. Keyboard and mouse focus icon, indicating the PC where the keyboard and mouse focus is currently located.
Page 33 1~4 button: 1. Press directly to switch among 4 PCs. After switching, 2 displays will display the selected PC at the same time, i.e. display mode 1. 2. In the settings interface, press [ ] to return to the main interface. Display selection button: Directly press the button, then press the [1~4] buttons according to the prompt of the LCD screen to make the selected monitor display the selected...
Page 34 state, and then press the [ ] button to unlock. 2. In the menu and setting interface, press [ ] button to page forward or select to the left. USB lock button: 1. Directly press [ ] button, follow the prompts on the LCD screen, then press the ] button to lock the external USB 3.0 devices to the current PC.
Page 35 Tips: 1. Only numbers 1,2,3,4 on the front panel of the KVM are available when changing PIN. You can also set a PIN to null to unlock without a password. 2. Under the PIN modiﬁcation interface, the button [ ] is used as the return button. Lock button: 1.
Page 36: Ir Remote Control
10.2 IR Remote Control —— Press directly to select among 4 PCs, and 2 displays will display the selected PC at the same time. (i.e. display mode 1) —— Press the key, and then press the [1~4] key to make the selected monitor display the selected PC.
Page 37: Keyboard Hot Keys
10.3 Keyboard Hot Keys Use external keyboard hot keys to switch the input source or set up some other functions. à Tips: The keyboard hot keys can only work with external keyboard correctly connected to the keyboard [Right-Ctrl]. and mouse input port of the KVM. The default hot key trigger key is After press [Right-Ctrl] key twice within 2 seconds and you will hear the buzzer beep once, please enter the commands within 3 seconds and the KVM will execute the corresponding commands.
Page 38 Switch PCs on diﬀerent monitors separately(i.e. display mode 2): Monitor A：[Right-Ctrl] → [Right-Ctrl] → [←] → [1]~[4] Right Right ← Ctrl Ctrl Monitor B：[Right-Ctrl] → [Right-Ctrl] → [→] → [1]~[4] Right Right → Ctrl Ctrl Switch keyboard and mouse focus in display mode 2: [Right-Alt] →...
Page 39 Toggle between keyboard and mouse modes: Right Right Ctrl Ctrl [Right-Ctrl] →[Right-Ctrl] →[F2] Tips: The default keyboard and mouse mode is Pass Through mode. When switching to Legacy Emulation Mode, the buzzer will emit 2 short beeps; when switching to Pass Through Mode, the buzzer will emit only 1 short beep.
Page 40 Disable/enable the current displayed PC’s built-in network card: Right Right Ctrl Ctrl [Right-Ctrl] →[Right-Ctrl] →[F4] Tips: The built-in network card is enabled by default. Enable it will trigger the buzzer to beep twice and disable it will trigger the buzzer to beep once. Turn on/oﬀ...
Page 41 Turn on auto scan mode: Right Right Space Ctrl Ctrl [Right-Ctrl] → [Right-Ctrl] → [Space] Tips: The default auto scan time interval is 5 seconds. You can change the time interval by setting on the front panel or following the step presented below. Increase or decrease auto scan time interval: Right Right...
Page 42: Change Hot Key Combination
11. Change Hot Key Combinations For your convenience, we have built-in a custom hotkey function. By setting, you can use any key on the keyboard connected to the KVM as the trigger key for the hot key command. The default hotkey trigger key is the [Right-CTRL]. The custom hotkey function can be set in the following ways: Method 1: Change the hot key through the settings in the LCD menu, press the [...
Page 43: Uart Command Description
12. UART Command Description The 4x2 HDMI+DP dual-monitor KVM Switch is equipped with a UART command interface, allowing users to communicate with the KVM using UART (Universal Asynchronous Receiver- Transmitter) commands. Command Function conﬁguration AA BB 03 00 00 EE Switch to PC1.
Page 44 Command Function AA BB 03 01 02 EE Switch the view of Output 1 to PC3. AA BB 03 01 03 EE Switch the view of Output 1 to PC4. AA BB 03 02 00 EE Switch the view of Output 2 to PC1. AA BB 03 02 01 EE Switch the view of Output 2 to PC2.
Page 45 V002...
Page 46 To Enjoy Smart HDK402 Master 24 Tesla Elec Technology Co.,Ltd WEEE-Reg.-Nr. DE 66784279...

This manual is also suitable for:

Hdk402-m24-eubk

TESmart HDK402 Master 24 User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TESmart HDK402 Master 24

Summary of Contents for TESmart HDK402 Master 24

This manual is also suitable for:

Table of Contents