Pyronix MC1Z2/SHOCK-WE Installation Manual page 9

Mark where the
device and the
magnet are to be
installed.
Place the covers on
top of the device and
the magnet
If the device is to be
installed in a brick or
plaster wall, drill out
the holes and insert
the appropriate wall
plugs.
Secure the top of the
device with the
screw.
Securely a x the
device and magnet.
In order to comply
with
standards, the centre
screw through the
knock out must be
utilised.
Cover the screw hole
with the cover
provided.
Insert the P
magnet is b
switch and
headers
(https://ww
we/docum
guide#C.+J