3
Slide the hard drive out of the computer.
4
Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
NOTICE:
damage the connector.
5
Slide the drive into the bay until it is fully seated.
6
Replace and tighten the screw.
7
Use the Operating System CD to install the operating system for your computer. For
instructions, see "Reinstalling Microsoft Windows XP" on page 96.
8
Use the Drivers and Utilities CD to install the drivers and utilities for your computer. For
instructions, see "Reinstalling Drivers and Utilities" on page 90.
Returning a Hard Drive to Dell
Return your old hard drive to Dell in its original or comparable foam packaging. Otherwise, the
hard drive may be damaged in transit.
102
Adding and Replacing Parts
Use firm and even pressure to slide the drive into place. If you use excessive force, you may
foam packaging
hard drive