Replacing the Hard Drive
1 Remove the new drive from its packaging.
2 Slide the hard drive into the bay until it is fully seated.
3 Replace and tighten the two screws.
4 Install the operating system for your computer, as needed (see "Restoring
5 Install the drivers and utilities for your computer, as needed (see
Returning a Hard Drive to Dell
Return your old hard drive to Dell in its original, or comparable, foam
packaging. Otherwise, the hard drive may be damaged in transit.
Downloaded from
www.Manualslib.com
Save the original packaging for storing or shipping the hard drive.
NOTICE:
Use firm and even pressure to slide the drive into place. If you use
excessive force, you may damage the connector.
Your Operating System" on page 103).
"Reinstalling Drivers and Utilities" on page 100).
1
1
foam packaging
manuals search engine
2
2
hard drive
Adding and Replacing Parts
111