Card With Bluetooth Wireless Technology - Dell INSPIRON Inspiron 9100 Owner's Manual

Card with Bluetooth
CAUTION:
Before you perform the following procedures, read and follow the safety instructions at the
front of this document (see page 9).
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as the back panel) on the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin
working inside the computer.
If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.
1
Remove the battery (see page 42).
2
Open the card door.
3
Pull the module out of the compartment so that you can disconnect the card from its cable
and remove it from the computer.
card
card door
®
Wireless Technology
card connector
Adding and Replacing Parts
121