Subwoofer
CAUTION:
Before performing the following procedures, read the safety instructions at the front of this
document (see page 9).
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching a connector on the back panel of the computer.
If you ordered a subwoofer with your computer, it is already installed. To remove and replace a
subwoofer:
1
Follow the procedures in "Before You Begin" (see page 99).
2
Remove the battery (see page 42).
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin
working inside the computer.
3
Remove the subwoofer from the battery:
Disconnect the subwoofer cable.
a
Use a small screwdriver or scribe to release the subwoofer from the compartment in
b
the battery.
cable
battery
subwoofer
subwoofer cable
connector
Adding and Replacing Parts
109