Page 1
ARX70 INSTRUCTIONS Remote Overview WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Radio sources: Press to tune to the previous station. Other sources: Press to skip to the beginning of the track or to the previous track. Radio sources: Press to tune to the next station.
Page 2
2 Place the stereo into Bluetooth ® discoverable mode. For detailed information, see the stereo owner's manual at support.garmin.com. 3 On the ARX70 remote, press and hold until the status LED starts alternating green and red. The remote searches for the stereo. When the remote pairs successfully, the status LED turns on green briefly and then turns off.
Page 3
Mounting the Remote Control Before mounting the remote control, you must connect it to the stereo (Connecting the ARX70 Remote to a Stereo, page 2). 1 Select an appropriate location for the remote control (Mounting Considerations, page 2). 2 Thoroughly clean and dry the mounting surface using a mixture of water and isopropyl alcohol. The mounting surface must be free of dirt, debris, wax, or coatings.
Page 4
® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. IC: 1792A-03344 M/N: A03344. 2.4 GHz @ 6.42 dBm nominal. 0° to 50°C (from 32° to 122°F) Withstands incidental exposure to water of up to 1 m for up to 30 min.
Need help?
Do you have a question about the FUSION ARX70 and is the answer not in the manual?
Questions and answers