Table of Contents More Information......8 Specifications.......... 8 Getting Started......... 1 Top Dimensions........9 Front Dimensions........ 9 Device Controls........1 Registering Your Fusion Device..... 9 Using the Dial to Select Items.....2 Software Updates......... 10 Entering Text........2 Adjusting the Backlight Brightness and Contrast...........
Garmin MS-NRX300 remote control with the FUSION MS-BB100 stereo. The available features and functions of the Garmin MS-NRX300 remote control may vary based on the stereo being controlled. For specific information about your stereo, see the stereo owner's manual.
Button Function • Select to turn on the device. • Select to mute and un-mute the audio. • Hold to turn off the remote and stereo. • Select to cycle the available sources. • Hold to switch from remote control mode to NMEA 2000 ®...
Assigning the Remote to a FUSION Stereo You must assign the remote control to the stereo after installing the remote control. When multiple Garmin stereos are installed on the NMEA 2000 network, you can assign a remote control to a specific stereo.
By default, the remote control is in remote control mode when you power it on, allowing you to control a connected Garmin device. You can switch to NMEA 2000 repeater mode to view supported data sentences from connected NMEA 2000 devices.
Selecting NMEA 2000 Information to View Before you can view NMEA 2000 information, you must set the remote control to NMEA 2000 repeater mode. 1 Select > SETTINGS > NMEA MONITOR. 2 Select the NMEA 2000 supported data sentences to view. You can view information only from sensors connected to the same NMEA 2000 network as the remote control.
Selecting a Different Bluetooth Source When you have more than one Bluetooth device paired to the stereo, you can select a different source when needed. You can pair the stereo with up to eight Bluetooth devices. 1 With the BLUETOOTH source selected, select 2 Select a Bluetooth device.
Radio To listen to AM or FM radio, you must have a suitable marine AM/FM antenna properly connected to the stereo and be within range of a broadcasting station. For instructions on connecting an AM/FM antenna, see the stereo installation instructions. To listen to DAB stations, you must have the appropriate equipment.
General Settings Select > SETTINGS. NOTE: When an option button is filled, the option is on. When the button is clear, the option is off. NOTE: Not all options and settings are available for all stereos. See the stereo owner's manual for more details. ZONE: Enables you to configure the speaker zones.
Front Dimensions 110 mm (4.33 in.) 70 mm (2.76 in.) Registering Your Fusion Device Help us better support you by completing our online registration today. • Go to garmin.com/account/register. • Keep the original sales receipt, or a photocopy, in a safe place. More Information...
For best results, you should update the software in all FUSION devices at the time of installation to ensure compatibility. You can update the software using a USB flash drive. For software updates and instructions on updating the device using the USB flash drive, go to the device product page at support.garmin.com. More Information...
Page 16
February 2024 GUID-180BAE26-C598-4176-9556-D4CB27B467B6 v3...