V
E R I F Y T H A T T H E S C A N N E R I S R E C O G N I Z E D B Y
Windows XP:
1 Click Start→ Control Panel→ Printers and Other Hardware→ Scanners
and Cameras.
2 If your scanner is listed, Windows recognizes the scanner.
Windows Vista:
1 Click Start
Cameras.
2 If the scanner is listed, Windows recognizes the scanner.
R
E I N S T A L L T H E S C A N N E R D R I V E R
instructions.
Sound and Speaker Problems
CAUTION:
safety instructions in the
No sound from speakers
NOTE:
The volume control in MP3 and other media players may override the
Windows volume setting. Always check to ensure that the volume on the media
player(s) has not been turned down or off.
C
H E C K T H E S P E A K E R C A B L E C O N N E C T I O N S
connected as shown on the setup diagram supplied with the speakers. If you
purchased a sound card, ensure that the speakers are connected to the card.
E
N S U R E T H A T T H E S U B W O O F E R A N D T H E S P E A K E R S A R E T U R N E D O N
setup diagram supplied with the speakers. If your speakers have volume
controls, adjust the volume, bass, or treble to eliminate distortion.
A
W
D J U S T T H E
I N D O W S V O L U M E C O N T R O L
icon in the lower-right corner of your screen. Ensure that the volume is turned
up and that the sound is not muted.
D
I S C O N N E C T H E A D P H O N E S F R O M T H E H E A D P H O N E C O N N E C T O R
the speakers is automatically disabled when headphones are connected to the
computer's front-panel headphone connector.
T
E S T T H E E L E C T R I C A L O U T L E T
testing it with another device, such as a lamp.
94
Troubleshooting
→ Control Panel→ Hardware and Sound→ Scanners and
—
Before you begin any of the procedures in this section, follow the
Product Information Guide
Ensure that the electrical outlet is working by
—
M
I C R O S O F T
See the scanner documentation for
.
Ensure that the speakers are
—
Click or double-click the speaker
—
W
I N D O W S
See the
—
Sound from
—