Removing An Expresscard Or Blank - Dell Inspiron 1200 Owner's Manual

1 2
1 slot 2 ExpressCard
The computer recognizes the ExpressCard and automatically loads the
appropriate device driver. If the configuration program tells you to load the
manufacturer's drivers, use the floppy disk or CD that came with the
ExpressCard.

Removing an ExpressCard or Blank

CAUTION:
Before you begin any of the procedures in this section, follow the
Product Information Guide
safety instructions in the .
Press the release latch and remove the card or blank. For some release latches,
you must press the latch twice: once to pop the latch out, and then a second
time to pop the card out.
Save a blank to use when no ExpressCard is installed in a slot. Blanks protect
unused slots from dust and other particles.
65
Using Cards