Power Lights - Dell Inspiron 1200 Owner's Manual

Windows Vista:
1 Click Start
Personalization→ Display Settings.
2 Adjust Resolution and Colors settings, as needed.
3D image quality is poor
C
H E C K T H E G R A P H I C S C A R D P O W E R C A B L E C O N N E C T I O N
power cable for the graphics card(s) is correctly attached to the card.
Only part of the display is readable
C
O N N E C T A N E X T E R N A L M O N I T O R
1 Shut down your computer and connect an external monitor to the
computer.
2 Turn on the computer and the monitor and adjust the monitor brightness
and contrast controls.
If the external monitor works, the computer display or video controller may
be defective. Contact Dell (see "Contacting Dell" on page 129).

Power Lights

CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the
The power button light located on the front of the computer illuminates and
blinks or remains solid to indicate different states:
• If the power light is green and the computer is not responding, see
"Diagnostic Lights" on page 73.
• If the power light is blinking green, the computer is in standby mode. Press
a key on the keyboard, move the mouse, or press the power button to
resume normal operation.
• If the power light is off, the computer is either turned off or is not
receiving power.
– Reseat the power cable into both the power connector on the back of
the computer and the electrical outlet.
→ Control Panel→ Hardware and Sound→
Product Information Guide
Ensure that the
—
.
Troubleshooting
97