Senix X2 HTPX2-M-EU Instruction Manual page 2

TABLE OF CONTENTS
SAFETY & INTERNATIONAL SYMBOLS ..............2
SAFETY INSTRUCTIONS .........................................3
KNOW YOUR UNIT .....................................................7
SPECIFICATIONS .......................................................8
ASSEMBLY ...................................................................8
OPERATION ..................................................................9
MAINTENANCE .........................................................13
TROUBLESHOOTING ..............................................15
SAFETY &
INTERNATIONAL
SYMBOLS
Explanation of safety & international symbols
describes safety and international symbols
and pictographs that may appear on this
product. Read the operator's manual for
complete safety, assembly, operating and
maintenance and repair information.
Caution / Warning.
To reduce the risk of injury, user
must read instruction manual.
Wear eye protection.
Wear a dust mask.
Wear eye and head protection.
Wear safety footwear.
Wear protective gloves.
Wear hearing protection.
Do not use in rain or wet
conditions.
EN - 2
DANGER - Keep hands away from
blade.
Warning: cutting means continues
to run after the motor is switched
off.
Keep sufficient distance away from
electrical power lines.
Do not dispose of battery packs in
rivers or immerse in water.
Do not dispose of battery packs in fire.
They will explode and cause injury.
Use and store the battery at a
temperature below 50°C (122°F)
Do not disassemble, crush, heat
above 100°C (212°F); Never expose
the battery to microwaves or high
pressures.
Keep bystanders a safe distance
away from the work area.
Indoor use only. Only use battery
charger indoors.
RCM Mark
SENIX.COM.AU