Advertisement
Quick Links
Instruction Manual
Model:
HTPX2-M-EU
CORDLESS POLE HEDGE
TRIMMER
• SAFETY
• ASSEMBLY
• OPERATION
CAUTION: Before using this tool, please read this manual completely,
• MAINTENANCE
and follow all operating safety measures.
Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207
For customer support, please call 1300 461 825 or email us at info@senixtool.com
SENIX.COM.AU
v. 1.1
English
Advertisement
Related Manuals for Senix X2 HTPX2-M-EU
Summary of Contents for Senix X2 HTPX2-M-EU
- Page 1 CAUTION: Before using this tool, please read this manual completely, • MAINTENANCE and follow all operating safety measures. Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207 For customer support, please call 1300 461 825 or email us at info@senixtool.com SENIX.COM.AU v.
- Page 2 Wear a dust mask. Indoor use only. Only use battery charger indoors. Wear eye and head protection. RCM Mark Wear safety footwear. Wear protective gloves. Wear hearing protection. Do not use in rain or wet conditions. EN - 2 SENIX.COM.AU...
- Page 3 When operating a power tool outdoors, hazards. use an extension cord suitable for Do not let familiarity gained from outdoor use. Use of a cord suitable for 3 - EN SENIX.COM.AU...
- Page 4 WARNING! Slippery handles and grasping surfaces do not allow for safe handling and control of Only use following batteries: B20X2/B25X2/ the tool in unexpected situations. B40X2/B50X2/B60X2/B80X2 and chargers: CHX2/CHQX2/CHQX2-M-EU/CHDX2-M-EU. EN - 4 SENIX.COM.AU...
- Page 5 Prolonged use of this product expose the operator to vibrations and may produce EXTENDED-REACH HEDGE ‘whitefinger’ disease. In order to reduce the risk, please wear gloves and keep your TRIMMERS hands warm. If any of the ‘whitefinger’ 5 - EN SENIX.COM.AU...
- Page 6 This pole hedge trimmer is only intended to be used for cutting hedges, bushes and shrubs in domestic gardens. Do not cut branches exceeding the stated maximum capacity. Do not use it for others purposes. EN - 6 SENIX.COM.AU...
- Page 7 As a pole hedge trimmer Cutting hedges, bushes and shrubs in domestic gardens. Blade Cover Telescopic Locking Clip Blade Pole Cover Bracket Pivot Button Shoulder Strap Support Trigger Switch Locking Sleeve Handle Telescopic Pole Safety Lock Button 7 - EN SENIX.COM.AU...
- Page 8 3. Slide the locking sleeve to the locking base Ensure that you have all the accessories and rotate clockwise till fully tighten. and tools needed for assembly and operation. This also includes suitable personal protective equipment. EN - 8 SENIX.COM.AU...
- Page 9 Keep all parts of your body away from the rotating cutting attachment and hot surfaces. WEARING THE SHOULDER STRAP 9 - EN SENIX.COM.AU...
- Page 10 Failure to lock the telescopic pole as clip. instructed may result in injury. 1. Turn off the unit and disconnect the battery pack from the trimmer. 2. Open the telescopic locking clip to release the pole. EN - 10 SENIX.COM.AU...
- Page 11 In this situation, let the • Do not overwork yourself. Take regular power tool/battery cool before turning the tool breaks to ensure you can concentrate on on again. the work and have full control over the pole trimmer. 11 - EN SENIX.COM.AU...
- Page 12 When trimming new growth, use a wide sweeping action, so that the stems are fed directly into the cutting blade. Older growth will have thicker stems and will be trimmed easiest by using a sawing movement. Fig. 14 EN - 12 SENIX.COM.AU...
- Page 13 Clean the product as described above. • Always carry the product by its handle. • Protect the product from any heavy impact or strong vibrations which may occur during transportation in vehicles. • Secure the product to prevent it from 13 - EN SENIX.COM.AU...
- Page 14 Electrical products should not be discarded with household products. Used electrical products must be collected separately and disposed of at collection points provided for this purpose. Talk with your local authorities or dealer for advice on recycling. EN - 14 SENIX.COM.AU...
- Page 15 Replace with a new one unsatisfactory worn Vibration or noise is Bolts/nuts are loose Tighten bolts/nuts excessive Battery pack capacity too Remove and charge battery pack Product suddenly stops Battery too hot Remove battery pack and let it cool down 15 - EN SENIX.COM.AU...
Need help?
Do you have a question about the X2 HTPX2-M-EU and is the answer not in the manual?
Questions and answers