Download Print this page

Senix HTX2-M-EU Instruction Manual

Cordless hedge trimmer xx2 18 v lithium-ion
Hide thumbs Also See for HTX2-M-EU:

Advertisement

Quick Links

Instruction Manual
Model:
HTX2-M-EU
CORDLESS HEDGE TRIMMER
• SAFETY
• ASSEMBLY
• OPERATION
CAUTION:Before using this tool, please read this manual completely,
• MAINTENANCE
and follow all operating safety measures.
Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207
For customer support, please call 1300 461 825 or email us at info@senixtool.com
SENIX.COM.AU
English

Advertisement

loading
Need help?

Need help?

Do you have a question about the HTX2-M-EU and is the answer not in the manual?

Questions and answers

Summary of Contents for Senix HTX2-M-EU

  • Page 1 CAUTION:Before using this tool, please read this manual completely, • MAINTENANCE and follow all operating safety measures. Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207 For customer support, please call 1300 461 825 or email us at info@senixtool.com SENIX.COM.AU...
  • Page 2: Table Of Contents

    Water entering a power tool will increase the risk of electric shock. Indoor use only. Only use battery Do not abuse the cord. Never use the cord charger indoors. for carrying, pulling or unplugging the EN - 2 SENIX.COM.AU...
  • Page 3 A careless action can cause severe Use power tools only with specifically English SENIX.COM.AU...
  • Page 4: Hedge Trimmer Safety Warnings

    When transporting or storing the hedge WARNING: trimmer, always use the blade cover. Proper handling of the hedge trimmer will decrease Use only SENIX X2 batteries (B20X2/B25X2/ the risk of personal injury from the blades. B40X2/B50X2/B60X2/B80X2) and chargers (CHX2/CHQX2/CHQX2-M-EU/CHDX2-M-EU). SAVE THESE...
  • Page 5: Know Your Unit

    KNOW YOUR UNIT APPLICATIONS Model: HTX2-M-EU As a hedge trimmer: Cutting, trimming and shaping hedges in domestic use. Blade Cover Cutting Blades Guard Front Handle Safety Switch Rear handle Motor Housing Switch Trigger English SENIX.COM.AU...
  • Page 6: Specifications

    SPECIFICATIONS* ASSEMBLING THE FRONT HANDLE Model HTX2-M-EU WARNING: Input voltage 18 V (20 V Max*) To avoid serious personal injury and damage Motor type Brushed to the unit, shut the unit off before removing or installing an attachment. No-load speed...
  • Page 7: Installing/Removing The Battery Pack

    If the foreign objects can not be removed, e.g. wire fences, please mark and remember it to avoid toughing them during SWITCHING ON/OFF cutting. Run the machine to top speed before cut- Hold the product as in working condition. English SENIX.COM.AU...
  • Page 8: Cutting Tips

    Always use the hedge trimmer properly. • Do not force the hedge trimmer through heavy shrubbery. This can cause the blades to bind and slow down. If the blades slow EN - 8 SENIX.COM.AU...
  • Page 9: Maintenance

    Fig. 9 CLEANING Fig. 8 Switch the product off, pull out the battery pack from the product. Use a small brush to clean the outside of the unit. Do not use strong detergents. Household English SENIX.COM.AU...
  • Page 10 Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. During the operation, the leaves or tree branches may be cut by the unit, users should clean these objects to protect environment. EN - 10 SENIX.COM.AU...
  • Page 11: Troubleshootin

    Replace with a new one unsatisfactory Vibration or noise is Bolts/nuts are loose Tighten bolts/nuts excessive Remove and charge battery Battery pack capacity too low pack Product suddenly stops Remove battery pack and let it Battery too hot cool down English SENIX.COM.AU...