Advertisement
Quick Links
Instruction Manual
Model:
HTX6-M1-EU
CORDLESS HEDGE TRIMMER
• SAFETY
• ASSEMBLY
• OPERATION
CAUTION: Before using this tool, please read this manual completely,
• MAINTENANCE
and follow all operating safety measures.
Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207
For customer support, please call 1300 461 825 or email us at info@senixtool.com
SENIX.COM.AU
English
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Senix HTX6-M1-EU
Summary of Contents for Senix HTX6-M1-EU
- Page 1 CAUTION: Before using this tool, please read this manual completely, • MAINTENANCE and follow all operating safety measures. Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207 For customer support, please call 1300 461 825 or email us at info@senixtool.com SENIX.COM.AU...
-
Page 2: Table Of Contents
Wear head protection. Wear eye protection. Wear ear protection. Wear a dust mask. Wear safety footwear. Wear protective gloves. Do not expose the product to rain or wet conditions. Keep hands away from danger. Keep hands away from blade. EN - 2 SENIX.COM.AU... -
Page 3: Safety Instructions
The Damaged or entangled cords increase the correct power tool will do the job better and safer at the rate for which it was designed. risk of electric shock. 3 - EN SENIX.COM.AU... -
Page 4: Hedge Trimmer Safety Warnings
If damaged, have the power tool repaired before use. Many WARNING! accidents are caused by poorly maintained Use only SENIX X6 batteries (B30x6, B40x6, power tools. B60x6, B80x6 and B120x6) and chargers Keep cutting tools sharp and clean. -
Page 5: Intended Use
INTENDED USE This cordless hedge trimmer is intended for cutting and trimming hedges and bushes in domestic areas. It is not intended to be used for cutting above shoulder level. Do not use it for other purpose. 5 - EN SENIX.COM.AU... -
Page 6: Know Your Unit
KNOW YOUR UNIT APPLICATIONS Model: HTX6-M1-EU As a cordless hedge trimmer: Cutting and trimming hedges and bushes in domestic areas. Blade Assembly Front Switch Trigger Blade Sheath Hand Guard Front Handle Control Panel Rear Switch Trigger Rear Handle Battery-Release Button... -
Page 7: Specifications
Unpack all parts and lay them on a flat, place. stable surface: Remove all packing materials and shipping devices, if applicable. The scope of delivery varies depending on the country and purchased variant. Model HTX6-M1-EU • Hedge trimmer x1 Fig. 1 • Blade Sheath x1 •... -
Page 8: Operation
WARNING! assembling parts, making adjustments, cleaning, or when not in use. Always keep both hands on the hedge trimmer Do not use any attachments or accessories EN - 8 SENIX.COM.AU... -
Page 9: Adjusting The Rear Handle
-90° Fig. 8 WARNING! When the handle is adjusted, the cutting blade Fig. 4 must not be running. NOTE: While working, the handle should always be facing upwards irrespective of how the hedge trimmer is directed. 9 - EN SENIX.COM.AU... -
Page 10: Control Panel
Stop the hedge trimmer. Pull out the battery pack from the product. Lay the hedge trimmer • Before starting the hedge trimmer, hold on a flat surface and apply light weight EN - 10 SENIX.COM.AU... -
Page 11: Sharpening The Blade
Talk with your local authorities or dealer for advice on • Switch the product off, pull out the battery recycling. pack from the product. • Use a soft brush to remove debris from air vents and cutting blade. 11 - EN SENIX.COM.AU... -
Page 12: Troubleshooting
Replace with a new blade. Contact an authorized service Bent or damaged teeth. center for blade replacement service. Tighten the blade bolts. Using a Loose blade bolts. wrench, turn the bolt clockwise to tighten. EN - 12 SENIX.COM.AU...
Need help?
Do you have a question about the HTX6-M1-EU and is the answer not in the manual?
Questions and answers