VeriFone X990 User Manual

Thank you very much for choosing VERIFONE products, please read this manual before deployment so that you could know
the performance deeply. Please keep this manual for your reference.
Verifone will try best to adopt new technologies, new components, new software to improve products. The features, functions
and operations described in this document may be different from the performance of the selling products, in some cases,
image is prototype devices. Please inquire the company or agent for appropriate update.
Verifone shall not be liable for any consequences arising from unauthorized changes to the equipment, replacement of the
connected equipment and cables not as specified.
The Product Manual applies to Model X990 UX.
Verifone Systems (China) Inc. reserves the right to change product technical specification without prior notice.
1. Overview
Smart card (option)
Waterproof plug for physical interface*8
2. User instruction
2.1 ON/OFF
The terminal will be turned on automatically when connecting to power supply and powered off when disconnecting.
2.2 Magnetic stripe card (option)
Put the magnetic card into the magnetic card slot to read, magnetic side towards the LCD. Keep it smooth, uniform when
swiping the card.
2.3 Smart card (option)
Insert smart card into the smart card slot, the metal pads of the smart card should facing up, please refer to card identification.
2.4 Contactless card
Tab the contactless card near the contactless card reader zone on the device, to make contactless card transaction.
Put one contactless card one time to avoid confliction if putting more then one card.
2.5 QR code
When the scanning indicator lights up, put the payment QR code at the scanning camera window.
User Manual
CLTS/NFC card
reading area
Touch screen
Magnetic stripe (option)
Sensor
Camera
M4 Washer and Screws*6
USB Type-B
4G/3G/2G SMA
WLAN
AUX
DC IN/MDB
Speaker
Camera fill light
Waterproof gasket
POS Terminal User Manual
Product label
Inside:
Reset button
Service button
PSAM&SIM&Micro SD card slot
USB Type-C
USB Type-A
2 x RS232
Extend Connector
Mounting bracket 4G/3G/2G Antenna